{"title":"Coating-Applikatoren","description":"\u003ch2 id=\"speakable-headline\"\u003eCoating-Applikatoren\u003c\/h2\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eCoating-Applikatoren\u003c\/strong\u003e: Coating-Applikatoren verteilen passende Beschichtungen kontrolliert. Blöcke, Tücher und andere Bauformen unterscheiden sich in Führung und Materialaufnahme.\u003c\/p\u003e\n\u003cp\u003eDas Arbeitsmedium muss zum Coating und zur Oberfläche passen; ausgehärtete Rückstände verändern den Applikator und gehören nicht erneut auf empfindlichen Lack.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/applikatorbloecke\"\u003eApplikatorblöcke\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/applikatortuecher\"\u003eApplikatortücher\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"sonax-profiline-coatingapplicator-applikationspads","title":"PROFILINE CoatingApplicator Applicator Pads (Evolon®)","description":"\u003ch2\u003eLay ceramic coatings down evenly and scratch-free with the SONAX CoatingApplicator\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat makes the SONAX CoatingApplicator special? An applicator pad with an Evolon® fabric face and a foam core inside — it lays ceramic coatings down evenly, scratch-free and sparingly, with no streaks and no wasted product.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eWhen you apply a ceramic coating, you're not just paying for the coating itself — you're paying for all the prep: the polish, the degrease, the controlled conditions. So it stings when the result gets ruined by a cheap applicator pad: uneven film thickness, micro-scratches in the freshly polished paint, product wasted through uncontrolled release. The \u003cstrong\u003eSONAX CoatingApplicator\u003c\/strong\u003e fixes exactly that. Its Evolon® fabric face, made from extremely fine polyamide and polyester fibres, lays every SONAX CeramicCoating down evenly and scratch-free — from paint coating through film coating to plastic coating. The foam core inside holds the coating and releases it in a controlled way, so a few drops are enough to coat a whole body panel.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScratch-free Evolon® face.\u003c\/strong\u003e The Evolon® fabric is built from fibres finer than a human hair — about ten times finer than ordinary microfibre. That ultra-smooth surface keeps micro-scratches off even delicate clear coats and freshly polished panels. When you're applying a coating, that's the whole game: any scratch made during application gets locked in under the ceramic layer, and after that there's no fixing it.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eControlled product release through the foam core.\u003c\/strong\u003e The foam core inside works as a reservoir — it takes up the liquid coating and releases it evenly across the whole working face. No drips, no flooding, no dry spots at the edge of the pad. That even release is the reason pro detailers don't reach for just any foam pad but for dedicated coating applicators: the film thickness of the coating is what mainly drives durability and looks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact format for precise work.\u003c\/strong\u003e At 85 × 60 mm the CoatingApplicator sits securely in your hand and reaches tight spots too — swage lines, seams, the transitions between body panels. When you're coating plastic trim, headlights or window frames, a compact pad works better than large applicators that sit unevenly on edges and corners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Always put the coating on the light Evolon® side of the pad — not on the dark foam side. Drop two or three drops onto the pad, spread them with a light wipe over a clean area, then work in a cross pattern: horizontal first, then vertical. That gets you an even film thickness with no directional streaks. Swap the pad every two or three parts at the latest — a saturated pad gives off too much product and leaves streaks.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eEvolon® fabric — why the material makes the difference in coating application\u003c\/h3\u003e\n\n\u003cp\u003eEvolon® is a brand name from the Freudenberg group for a special spunbond fabric made from continuous fibres. Unlike ordinary microfibre, which is woven or knitted, Evolon® fibres are formed by splitting a bicomponent filament — the result is fibres under a micrometre in diameter, noticeably finer and more uniform than woven microfibre. For coating application that has two practical upshots. First, the pad glides over the surface almost friction-free and causes no micro-scratches, not even on soft Japanese clear coats or freshly polished panels. Second, the fabric draws the coating up by capillary action and releases it in a controlled way again — much like a quality brush picks up paint without dripping.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eCoatingApplicator\u003c\/strong\u003e pairs that Evolon® fabric with a foam core inside that acts as an extra product reservoir. In practice that means: you put a few drops of coating on the pad, and the foam core spreads the product evenly across the whole contact face. Without that foam core the coating would stay concentrated at the spot where you dropped it and run out unevenly thin as you wipe — a classic problem with plain foam applicators that have no fabric face.\u003c\/p\u003e\n\n\u003cp\u003eA common misconception: some people think a soft microfibre cloth can do the same job as a dedicated coating applicator. That works for spray sealants, which get spread over a large area and wiped off. But with real ceramic coatings — SiO₂- or Si-carbon-based products that cross-link chemically on the surface — even film thickness is what makes or breaks the result. A microfibre cloth has an irregular surface with long fibre loops that soak the coating up unpredictably and lay it on too thick in places, too thin in others. The Evolon® pad, with its flat, even face, is the technically superior tool for this specific job.\u003c\/p\u003e\n\n\u003ch3\u003eCoating application step by step — how to get the most out of the pad\u003c\/h3\u003e\n\n\u003cp\u003eThe prep starts not at the pad but at the surface: before you pick up the \u003cstrong\u003eSONAX CoatingApplicator\u003c\/strong\u003e, the paint or film has to be washed, polished if needed, and degreased with \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-prepare-reiniger-kontrollspray-entfetter\"\u003eSONAX PROFILINE Prepare\u003c\/a\u003e. Any film of grease, any polishing residue under the coating hurts adhesion and shortens durability. Prepare strips those residues away cleanly and doubles as a control spray — under the control spray the last defects show up, the ones you want to fix before you coat.\u003c\/p\u003e\n\n\u003cp\u003eTake a fresh pad out of the pack and hold it with the light Evolon® side up. Drop two or three drops of coating in the middle of the fabric face — for the SONAX CeramicCoatings that's enough for an area of about 40 × 40 centimetres. Spread the product first with light strokes over the surface to wet the pad evenly, then apply in a cross pattern: horizontal first, then vertical. That technique makes sure the coating goes on gap-free and at an even thickness.\u003c\/p\u003e\n\n\u003cp\u003eWork in small sections — half a panel per pass is a good rule of thumb. After applying, you wipe excess coating off with a clean Coating Towel before it flashes off. On paint the wipe-off should happen within one to two minutes, on film faster. When you notice the pad releasing less evenly or the drag increasing as you wipe, swap the pad. A saturated or part-dried pad leaves streaks and spreads the product unevenly.\u003c\/p\u003e\n\n\u003cp\u003eThe ambient conditions matter a lot during application. Ideal is a temperature between 15 and 25 degrees Celsius at a relative humidity of 40 to 60 per cent. Too cold and the coating's cross-linking slows down; too warm and it dries out on the pad too fast — both hurt the result. Work in a closed garage or workshop where you can, not under direct sun. Draughts are a problem too: they speed up the flash-off and can carry dust particles onto the freshly coated surface, where they then get locked in under the ceramic layer.\u003c\/p\u003e\n\n\u003cp\u003eA pro trick for especially even results: use an LED inspection lamp during application. Under the directed light, unevenly coated spots show up straight away — as matte patches on the otherwise evenly glossy layer. That lets you fix problem areas before the coating cures and the fix becomes impossible.\u003c\/p\u003e\n\n\u003cp\u003eImportant: the \u003cstrong\u003eCoatingApplicator pads\u003c\/strong\u003e are single-use. After use the coating cures inside the pad and the Evolon® fibres lose their even structure. Reusing a used pad would cause exactly the micro-scratches the pad prevents when fresh. The six pads in the set are enough for a full vehicle coating — on a partial job you'll have pads left over for the next time.\u003c\/p\u003e\n\n\u003ch3\u003eWhich coatings is the applicator suited to — scope and limits\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX CoatingApplicator\u003c\/strong\u003e is designed for every SONAX CeramicCoating and works across the whole range: \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-ceramiccoating-cc-one-paint-keramikversiegelung\"\u003eCC One for paint\u003c\/a\u003e, CC Evo for the two-step coating, CC Pro for professional use, \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-ceramiccoating-cc-vinyl-ppf-folienversiegelung\"\u003eCC Vinyl+PPF for film\u003c\/a\u003e, \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-ceramiccoating-cc-plastic-rubber-kunststoffversiegelung\"\u003eCC Plastic+Rubber for plastic\u003c\/a\u003e and CC HeadlightCoating for headlights. The Evolon® face is material-compatible with every substrate — clear coat, film, hard plastic, polycarbonate.\u003c\/p\u003e\n\n\u003cp\u003eWhere the pad hits its limits: for spray sealants or wax products the CoatingApplicator isn't the right call. Spray sealants get applied over a large area and wiped off — a microfibre cloth is more efficient for that. Wax products have a much thicker consistency than ceramic coatings and would overload the foam core, so the controlled release stops working. The CoatingApplicator is a specialist: tuned for the thin, fast-curing ceramic coatings where precision and evenness come before everything.\u003c\/p\u003e\n\n\u003cp\u003eYou can apply glass coatings with the pad too, though for glass many detailers prefer an even more compact applicator or a folded suede cloth, to better control the higher pressure on the hard glass surface. On paint, film and plastic — the three main use cases — the CoatingApplicator is the first choice in the SONAX system though.\u003c\/p\u003e\n\n\u003cp\u003eA special case is matte film and matte paint: here the Evolon® material really shows its strength. Matte surfaces are extremely sensitive to scratches and friction — any damage to the matte microstructure leaves an unwanted shiny patch that can't be polished out. The ultra-fine Evolon® fabric glides over matte surfaces without changing the structure, and the coating goes on thin enough to keep the matte character fully intact. If you want to coat a matte film or a matte paint, do not under any circumstances reach for an ordinary foam pad — the risk of visible application marks is too high.\u003c\/p\u003e\n\n\u003ch3\u003eCoating applicator comparison — Evolon® vs. suede vs. foam\u003c\/h3\u003e\n\n\u003cp\u003eOn the market you'll find three main types of coating applicator: Evolon®-based pads, suede pads (faux suede) and plain foam applicators.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuede pads\u003c\/strong\u003e are the classic choice for a lot of detailers and often come bundled with coatings from other makers. They have a velvety, smooth face that spreads coatings well. The downside: suede material soaks the coating up heavily and releases it less controllably — you need more product per area. With expensive coatings that extra use adds up noticeably. Suede pads can also leave fine streaks on soft paint under high pressure, the kind that only show up once the coating has cured.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlain foam applicators\u003c\/strong\u003e with no fabric face are the cheapest option. They work for spray sealants and thick waxes but aren't ideal for ceramic coatings: the open-pore foam structure releases the thin coating uncontrollably — sometimes too much, sometimes too little. The result is spots with double the film thickness next to spots that are barely coated. On matte film or sensitive surfaces the coarse foam structure can also leave visible patterns behind. That's why in professional detailing shops you almost never see plain foam applicators used for coating application — there they only come out for polishing work or laying on waxes, where the demands on evenness are far lower.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eEvolon® pads\u003c\/strong\u003e bring the best of both worlds together: the ultra-fine fabric face glides streak-free like a good suede pad, while the foam core inside releases the coating in a controlled, sparing way. The lower product use offsets the higher price per pad — per coated vehicle you'll reckon on two to four pads fewer than with ordinary suede applicators, because you reload less product and swap less often. Over a year that means a measurable saving on coating use for a detailing shop coating three or four vehicles a week — and with a better end result on top. So the price per pad soon evens out once you look at the total cost of the coating job and not just the unit price of the applicator.\u003c\/p\u003e\n\n\u003ch3\u003eBuying the CoatingApplicator — set contents and recommendation\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX CoatingApplicator\u003c\/strong\u003e set holds six applicator pads in the 85 × 60 mm size — enough for a full vehicle coating plus a reserve. For shops that coat daily, a stock of two or three sets makes sense, so you never have to reorder mid-job. The pads are individually wrapped in film and so stay clean and contamination-free until you use them.\u003c\/p\u003e\n\n\u003cp\u003eFor the best result chain you pair the CoatingApplicator with the matching SONAX CeramicCoating of your choice and a SONAX Coating Towel for the wipe-off. The Coating Towels are built specifically for ceramic coating: extremely short-pile, so no fibres get locked into the coating, and soft enough not to damage the freshly applied layer as you wipe. This interplay of applicator, coating and wipe-off towel is the system SONAX intended for professional use — and the one that gets private detailers the best results in practice too.\u003c\/p\u003e\n\n\u003cp\u003eFor \u003cstrong\u003eprofessional use\u003c\/strong\u003e it pays to always keep at least one set in reserve. In the workflow of a vehicle detail, nothing is more annoying than running out on the last pad and having to break off the coating. Pros often work with a rotation system too: while one pad is working a section, a fresh pad is ready to start the next section seamlessly. That keeps the workflow steady, and the open time of the coating — the window before it flashes off — gets used to the full.\u003c\/p\u003e\n\n\u003cp\u003eOne last word on storage: keep unused pads dry and dust-free in their original packaging. Contaminated pads — through dust, polishing residue or fingerprints on the fabric side, say — can cause micro-scratches and shouldn't be used for coating application any more. When in doubt, grab a fresh pad: on a ceramic coating meant to last twelve to eighteen months, the pad is the cheapest element in the whole workflow — and at the same time the element that decides the quality of the result. If you spend hours polishing and degreasing during prep, the last step is no place to skimp on the applicator.\u003c\/p\u003e\n","brand":"SONAX","offers":[{"title":"6 pieces \/ 85 x 60 mm","offer_id":53519908405583,"sku":"D1-SNX-2377410","price":15.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-coatingapplicator-applikationspads_6-stueck.png?v=1730645209"},{"product_id":"gyeon-q2m-block-applicator-evo-applikatorblock-coating","title":"Q²M BlockApplicator EVO applicator block for coating","description":"\u003ch2\u003eApplying coatings and waxes evenly — a precise applicator tool with the GYEON Q²M Block Applicator EVO\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the GYEON Q²M Block Applicator EVO? A compact foam applicator (4×9×2.5 cm) from the Q²M line, built specifically for laying ceramic coatings, spray sealants and waxes down evenly on paint — controlled dosing, gentle on the surface and long-lasting in the material.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eAnyone who applies coatings or waxes to paint knows it: the result stands or falls with the applicator. Too much pressure, not enough consistency or the wrong material — and the product soaks in unevenly, you get patches or high spots that are a pain to fix later. The \u003cstrong\u003eGYEON Q²M Block Applicator EVO\u003c\/strong\u003e is the opposite of that: a compact, handy foam applicator (4×9×2.5 cm) with a defined firmness and even cell structure that picks up exactly the right amount of product and lays it down on the surface under control. Built for the Q²M line — but it plays nicely with just about any liquid coating and care product from the detailing world. Once you’ve worked with a properly sized applicator, you never want to wrestle again with an unsuitable cloth or foam that’s too soft and shoves the product in one direction instead of spreading it evenly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDefined cell structure for even product spread.\u003c\/strong\u003e The foam firmness and cell size of the Block Applicator EVO are tuned to the viscosity of ceramic coatings and spray sealants. The material neither soaks too much product deep into itself nor dumps too much at once — you get an even, thin layer that spreads easily. That matters especially with coatings like the \u003ca href=\"\/en\/products\/gyeon-q2-mohs-evo-paint-coating-keramikversiegelung-fuer-lack\"\u003eQ² Mohs EVO\u003c\/a\u003e, where laying it on too thick leads to high spots that can only be removed mechanically once cured. With the right applicator, that won’t happen to you.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact format for precise control.\u003c\/strong\u003e At 4×9×2.5 cm the Block Applicator EVO is small enough to work tight spots — mirrors, door handles, spoiler lips, bumper details — without accidentally wetting the areas next door with product. The block shape gives you a good grip and lets you guide it with even pressure without tipping or slipping. Working larger panels, you run it in strips and use the full length of the applicator as a guide line for an even application.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEVO generation: better material quality and durability.\u003c\/strong\u003e The EVO version of the Block Applicator brings a reworked foam quality — a more stable cell structure that doesn’t crush as quickly, and a surface that keeps its shape even after several wash cycles. An applicator that falls apart or turns uneven after its third use is no longer a tool. The EVO material lasts considerably longer with proper care and still delivers consistent application performance after many uses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Dampen the Block Applicator EVO briefly with the product you’re about to apply before the first pass — that stops the dry foam from grabbing too much coating at once and making your first strip too thick. Then lay it on in even, slightly overlapping strips. Rinse it out with clean water right after use and let it air-dry — never clean it with solvents, since that breaks the foam down. If you regularly apply different products, keep a separate applicator for each type to avoid cross-contamination: one for coatings, one for waxes, one for polishes.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eCoating applicator — how the Block Applicator EVO lays coatings evenly onto the paint\u003c\/h3\u003e\n\u003cp\u003eThe quality of an applied ceramic coating doesn’t just come down to the product itself, but largely to the applicator and your technique. An applicator material that’s too soft or too coarse can leave the coating going on unevenly — too thick in some spots, too thin in others. The result is high spots that show up as hazy streaks once cured and have to be cut back mechanically. The \u003cstrong\u003eGYEON Q²M Block Applicator EVO\u003c\/strong\u003e is built for exactly this job: the foam’s cell structure takes up the typical viscosity of liquid coatings evenly and releases the product in a defined, thin layer as you wipe. The result is an even coat that’s easy to level and leaves no hot-spot risk areas behind.\u003c\/p\u003e\n\u003cp\u003eThe choice of applicator matters most with nano-coatings and SiO₂-based spray sealants that flash off very fast and are hard to spread afterwards. With the Block Applicator EVO you work small areas (about 50×50 cm) and lay it on crosswise — first lengthwise, then across — to make sure every spot on the panel is evenly covered. The flat, rectangular shape backs up exactly this technique: you can see from the line where you’ve been and carry on precisely at the edge without sealing areas twice. Important: with the Block Applicator you always work panel by panel — never try to do the whole car in one go before you wipe off. With coatings, timing is everything.\u003c\/p\u003e\n\u003cp\u003eAnother advantage of the Block Applicator over an untargeted microfibre approach: you’re in full control of where the coating goes. Rubber seals, plastic parts that aren’t coating-friendly and chrome trim you can simply leave out, because the compact applicator block lets you work to the millimetre. That’s barely possible with a large cloth without the hassle of removing residue from unpainted parts afterwards.\u003c\/p\u003e\n\n\u003ch3\u003eUsing the Block Applicator EVO properly — step by step through the coating application\u003c\/h3\u003e\n\u003cp\u003eThe workflow with the \u003cstrong\u003eQ²M Block Applicator EVO\u003c\/strong\u003e starts before the actual application: make sure the paint is clean, degreased (e.g. with \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e) and free of polishing oil or shampoo residue. A coating only bonds properly on a prepped surface — a common mistake is skipping this prep and then wondering why the coating hazes unevenly. Then drip the coating straight onto the applicator — not onto the paint — and rub it in briefly and evenly before you start applying.\u003c\/p\u003e\n\u003cp\u003eApply in small sections — with coatings, typically one panel at a time. Guide the Block Applicator across the surface in strips with light, even pressure, slightly overlapping. Avoid circular wiping motions, which can spread coatings unevenly. When you come up against edges or trim, lift the applicator briefly and work there with the corner or edge of the block — that gives you more control in tight spots than the flat side. After application, let the coating flash off depending on the product and ambient temperature — this step is product-specific and stated in the relevant instructions — then wipe off with a clean microfibre cloth. After use, the applicator can be rinsed with lukewarm water and gently squeezed out. Never let it dry while compressed — that deforms the cell structure permanently.\u003c\/p\u003e\n\u003cp\u003eFor waxes like the Q² Wax the routine is similar, only the dwell time and the amount are a bit different: put wax on the applicator sparingly, apply in circular or straight strokes, and take it off with a microfibre cloth after a short dwell time. The Block Applicator works for both product categories — which makes it the most versatile applicator in the GYEON accessory range.\u003c\/p\u003e\n\n\u003ch3\u003eWhere it fits — when and where the Block Applicator EVO plays to its strengths\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGYEON Q²M Block Applicator EVO\u003c\/strong\u003e is the go-to tool for applying liquid coatings and waxes to paint — but its strengths really show in certain situations. With ceramic coatings like the \u003ca href=\"\/en\/products\/gyeon-q2-one-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² One EVO\u003c\/a\u003e the Block Applicator is the preferred pick, because it gives you the control over amount and spread you need for an even coating result. Anyone applying waxes like the Q² Wax will appreciate the block geometry, which makes it easy to guide even straight strokes while spreading the force under control.\u003c\/p\u003e\n\u003cp\u003eIt’s also at an advantage with its compact format when applying polymer spray sealants meant to be spread by applicator. For large areas like the bonnet or roof, you split the surface into sections and work systematically — the applicator is built for precise control, not for maximum coverage speed. An honest limitation: for very thin products like IPA-based prep sprays or fast-evaporating pre-cleaners the Block Applicator is less ideal — microfibre cloths are the better call there. The Block Applicator EVO plays its best hand with more viscous liquid products that need a defined spreading time and don’t dry off immediately. For those products — the actual coating and sealant products, in other words — it’s the right tool.\u003c\/p\u003e\n\n\u003ch3\u003eApplicator comparison — Block Applicator EVO vs. MF Applicator EVO, Coating Applicator and Wax Applicator\u003c\/h3\u003e\n\u003cp\u003eGYEON offers several applicators in the Q²M line built for different jobs, and it pays to know the differences. The \u003cstrong\u003eBlock Applicator EVO\u003c\/strong\u003e is the most versatile of them: compact block format, good grip, equally suited to coatings and waxes. The \u003cstrong\u003eMF Applicator EVO\u003c\/strong\u003e has a microfibre surface instead of pure foam and is especially good for creamy products or products where microfibre offers better pick-up and release than foam — e.g. certain waxes or glaze products that benefit from the microfibre structure. The \u003cstrong\u003eCoating Applicator\u003c\/strong\u003e is the more minimalist option — a thinner body, even more compact, suited to spots where the Block Applicator gets too big or you need to dose very sparingly. The \u003cstrong\u003eWax Applicator\u003c\/strong\u003e has a softer, porous structure optimised for pasty or creamy waxes and spreads waxes especially evenly. The differences between these applicators aren’t always huge, but in day-to-day detailing, picking the right applicator for the product at hand makes a noticeable difference in evenness and efficiency. The Block Applicator EVO is the best starting point for anyone who wants to start out with a versatile, solid tool.\u003c\/p\u003e\n\n\u003ch3\u003eBuying an applicator — who the GYEON Q²M Block Applicator EVO is the right tool for\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGYEON Q²M Block Applicator EVO\u003c\/strong\u003e is the right tool for anyone applying coatings, sealants or waxes themselves who cares about evenness and control. For getting started with ceramic coating it’s all but indispensable — a well-fitting applicator is what lets the coating bond evenly and keeps high spots from forming. For experienced detailers already working with applicators, the EVO generation is an upgrade in material quality and durability over generic foam applicators with no defined firmness or cell structure.\u003c\/p\u003e\n\u003cp\u003eAt 2 euros the Block Applicator EVO is no investment risk — but a tool you’ll definitely reach for again and again in your setup. It’s worth grabbing two or three straight away: one for coatings, one for waxes, one as a spare. That way you avoid product mixing — coating residue in the foam changes the application behaviour for a wax that follows — and you can always start with a fresh applicator. Paired with a quality GYEON coating from the Q² line you’ve got a complete system that reliably delivers professional application results even for hobby detailers. Anyone caring for cars regularly quickly builds up a little set — and the Block Applicator EVO is the solid heart of it.\u003c\/p\u003e\n","brand":"GYEON","offers":[{"title":"1 piece \/ 1.57x3.54x0.98 inches","offer_id":57335273881935,"sku":"D1-GYEON-Q2MBLKAPP","price":2.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/GYEON-Q_M_Block_Applicator_EVO_Applikator-4x9x2_5_cm.png?v=1775056745"},{"product_id":"gyeon-q2m-suede-evo-wildledertuch-applikationstuch","title":"Q²M Suede EVO Suede Cloth \/ Applicator Cloth (Velours)","description":"\u003ch2\u003eGYEON Q²M Suede – the applicator cloth for precise ceramic coatings\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cp\u003eGYEON Q²M Suede is a premium applicator cloth made from soft synthetic suede, built specifically for laying ceramic coatings, sealants and liquid protection products down evenly. Available in three formats (10×10 cm, 20×20 cm and 40×40 cm), it gives you precise, controlled application on paint, glass, plastic and wheels.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eAnyone who's applied a ceramic coating knows the applicator cloth is one of the make-or-break factors for the end result. A cloth that's too thick is hard to steer and spreads product unevenly. Too thin, and it soaks up too little product and leaves streaks. The wrong material reacts with the coating and messes with the cure. The right applicator cloth isn't a detail – it's the key to a flawless coating.\u003c\/p\u003e\n\n\u003cp\u003ePlenty of hobby detailers, and even seasoned pros, blame the product first when a coating goes wrong – not the applicator cloth. That's a common mix-up. Time and again the day-to-day work tells the same story: with the wrong cloth, even the best coating can't reach its full potential. Uneven product release gives you a patchy protective film, spots that flash off too fast and, in the end, High Spots that are a pain to fix. Anyone who's had to polish out a High Spot knows it eats more time than the whole coating job did. So picking the right applicator cloth isn't a luxury call – it's a practical must for results you can rely on.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eGYEON Q²M Suede\u003c\/strong\u003e was built for exactly this. Synthetic suede has been the go-to material in professional coating work for years: soft enough to leave no marks, with controlled absorbency that picks up just the right amount of product, and it steers precisely – key when you're cross-hatching on paint.\u003c\/p\u003e\n\n\u003cp\u003eWhat many people don't realise: application quality drives not just the look, but how long the coating lasts. A thin, even layer of a ceramic coating holds up longer and protects better than a thick, unevenly applied one. How well the coating bonds to the substrate comes down to full, bubble-free contact between the coating and the paint – and that full contact only happens once the product is spread evenly with a suede applicator cloth. In that sense the cloth isn't just a helper, it's a core part of the coating system.\u003c\/p\u003e\n\n\u003cp\u003eAt Detailing1 the Q²M Suede is our go-to applicator cloth for every GYEON coating – but it works just as well for coatings from other brands. The three formats cover different jobs: from the small 10×10 cm cloth for precise detail work to the big 40×40 cm format for fast coverage over large panels.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eTechnology \u0026amp; material: why synthetic suede?\u003c\/h3\u003e\n\n\u003cp\u003eThe material in the GYEON Q²M Suede is no ordinary microfibre cloth. Synthetic suede – also called „suede“ or faux suede – has a specific surface texture that's fundamentally different from standard microfibre. The fibres stand upright and are packed evenly and densely, which lets product come off onto the surface very evenly. Unlike looped microfibre, suede has no gaps in the weave where coating could pool and clump up.\u003c\/p\u003e\n\n\u003cp\u003eThat property is decisive when you're working with ceramic coatings. Ceramic coatings are high in viscosity and dry very fast once they hit the air. An applicator cloth with an uneven fibre structure spreads the product unevenly and leaves High Spots – patches where too much product went down, showing up after the cure as matte or glossy smears. The Q²M Suede stops that with its even, controlled fibre structure.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic suede structure also means the cloth builds no static charge as you apply – the kind that would pull in dust. That matters especially when you're working somewhere dusty. Static charge is a known headache with some plastic applicators, which tend to grab airborne dirt and drag it into the still-wet coating layer. The suede material stays neutral on that front.\u003c\/p\u003e\n\n\u003cp\u003eAnother key point: the synthetic suede on the Q²M Suede is chemically stable against most of the solvents and hardeners used in coating work. Cheap microfibre cloths can break down or react chemically with more aggressive coatings – which contaminates the product and ruins the result. The Q²M Suede is built to stand up to the chemistry of pro coatings.\u003c\/p\u003e\n\n\u003cp\u003eAn often underrated plus of synthetic suede is how little it abrades on its own. When an applicator cloth is run over an already cleaned, degreased paint surface, it must not leave fine scratches of its own. The evenly dense, upright fibre structure of the suede means the cloth glides rather than rubs. Looped microfibre, by contrast, can leave minimal marks on sensitive paint thanks to its uneven fibre structure – especially when you go over an area several times. That's relevant with ceramic coating application, because you pass over the surface several times to get an even spread.\u003c\/p\u003e\n\n\u003cp\u003eThe backing of the Q²M Suede plays a part too: the back of the cloth is firm and gives you a stable surface to guide it by. Unlike pure suede cloths with no reinforced backing, the Q²M Suede can be worked with constant pressure – key for an even coating thickness. Too thin a layer doesn't protect well; too thick causes High Spots. The Q²M Suede helps you keep the layer in the sweet spot through controlled application.\u003c\/p\u003e\n\n\u003cp\u003eThe three formats are optimised for different jobs: the \u003cstrong\u003e10×10 cm format (10 pieces)\u003c\/strong\u003e suits details, spokes, trim strips and small coating areas. The \u003cstrong\u003e20×20 cm format (10 pieces)\u003c\/strong\u003e is the most-used all-rounder for coating panels like bonnets, doors and large surfaces. The \u003cstrong\u003e40×40 cm format (2 pieces)\u003c\/strong\u003e is for especially fast application over very large panels, or for beginners who prefer a bigger surface to guide.\u003c\/p\u003e\n\n\u003ch3\u003eApplying it right: how to use the Q²M Suede properly\u003c\/h3\u003e\n\n\u003cp\u003eThe right technique matters just as much as the right tool with ceramic coatings. The applicator cloth is a helper – the technique decides the result.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePrep:\u003c\/strong\u003e The cloth should be dry and clean. Put two to four drops of coating straight onto the cloth or onto a small patch of it – never more than you need. Too much product at once is one of the most common ceramic coating mistakes and leads to High Spots that are tough to remove.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Run the cloth over the paint with even, light pressure – first in one direction (say horizontal), then cross-hatched (vertical). This cross-hatch method makes sure the product spreads evenly with no streaks or gaps. Work in small sections of about 50×50 cm and finish each one before moving to the next.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMind the flash time:\u003c\/strong\u003e After you apply, the product needs a set time to cure depending on temperature and humidity (flash time). During that window, set the cloth aside and don't touch the surface. Once the flash time is up, buff the product off with a fresh, clean microfibre cloth.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTemperature and humidity:\u003c\/strong\u003e Both have a big effect on the flash time, and with it the timing of your application. In high temperatures (over 25°C) and low humidity a ceramic coating flashes off very fast – the flash time can drop below 60 seconds. In that case, go for an even smaller working area (25×25 cm instead of 50×50 cm), and keep the cloth fresh and lightly loaded. In cool conditions (under 15°C) the flash time gets a lot longer, giving you more room to work. The ideal window is 15–25°C and moderate humidity. The suede cloth stays stable across every temperature range and releases product evenly – an edge over sponge applicators, which stiffen up in the cold and spread product less well.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAfter use:\u003c\/strong\u003e Store the Q²M Suede in a sealable plastic bag right after use, or bin it once it's fully saturated. Cured coating residue means a cloth can't be fully cleaned any more and should be replaced at that point.\u003c\/p\u003e\n\n\u003ch3\u003eWhere it's used: what the Q²M Suede is for\u003c\/h3\u003e\n\n\u003cp\u003eThe suede applicator cloth was built primarily for coatings, but it finds use in other areas of car care too.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCeramic coatings\u003c\/strong\u003e are the main job. Whether GYEON Q²M Mohs, Q²M Wetcoat, Q²M One or another coating from the GYEON range – the Q²M Suede is built to spread all of them out perfectly. Products from other brands go on beautifully with the suede too.\u003c\/p\u003e\n\n\u003cp\u003eWith \u003cstrong\u003esealants and polymer sealants\u003c\/strong\u003e the suede cloth is just as ideal. These products have similar needs to ceramic coatings – even spread, nothing too heavy – and they benefit from the controlled absorbency of synthetic suede.\u003c\/p\u003e\n\n\u003cp\u003eFor \u003cstrong\u003eglass sealants\u003c\/strong\u003e the small 10×10 cm format is especially good. Glass has an even, smooth surface that calls for precise application – above all at the edges and corners of the windscreen. The small format also lets you work precisely around washer jets, mirror housings and side windows.\u003c\/p\u003e\n\n\u003cp\u003eFor \u003cstrong\u003ewheel sealants\u003c\/strong\u003e the Q²M Suede works well too – even though wheels are a challenge thanks to their shape. Around the spokes and deep-set areas of the wheel the small 10×10 format is ideal: it gets into tight angles and lets you seal the whole wheel face completely. Wheel sealants really pay off, since wheels take a beating from brake dust, temperature swings and stone chips – a good sealant makes cleaning far easier and protects the surface long-term.\u003c\/p\u003e\n\n\u003cp\u003eThe suede cloth also suits \u003cstrong\u003eapplying leather sealants and plastic dressings\u003c\/strong\u003e inside the cabin. The soft surface won't scratch sensitive interior surfaces, and the even product release keeps you from over-applying on seats and door cards.\u003c\/p\u003e\n\n\u003ch3\u003eComparison: Q²M Suede vs. other applicators\u003c\/h3\u003e\n\n\u003cp\u003eIn the coating applicator segment you've got a few tools to choose from – sponge applicators, microfibre cloths and suede. Each has its own pros and cons, and the suede cloth clearly stakes out its place, through its material properties, as a specialist pick for demanding jobs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSponge applicators with a microfibre outer\u003c\/strong\u003e are the most common alternative. They pick up product well and are easy to handle, but the downside is that the microfibre structure makes the spread less even than smooth suede does. With ceramic coatings that have a fast flash time, that's a real drawback.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eReal suede (animal leather)\u003c\/strong\u003e still gets used now and then by classic-car restorers and some traditional coaters. It has similar properties to synthetic suede, but it's pricier, harder to clean and less consistent to work with. Synthetic suede like the Q²M Suede's is the better call for modern coating work: consistent quality, defined absorbency, and chemical stability against modern ceramic coating formulas, which often work on a silicon-dioxide base.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOrdinary microfibre cloths\u003c\/strong\u003e aren't ideal for coating application: the looped structure soaks up too much product, releases it in an uncontrolled way and can't be guided evenly enough. High Spots and streaking are common problems when you use looped microfibre for ceramic coatings.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eGYEON Q²M Suede\u003c\/strong\u003e, as synthetic suede, gives you the best mix of controlled absorbency, even product release and easy handling. That's why professional coaters worldwide reach for suede applicators – and why GYEON uses exactly this material for its own coating range.\u003c\/p\u003e\n\n\u003ch3\u003eWho it’s for and buying advice\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eGYEON Q²M Suede\u003c\/strong\u003e is for anyone laying ceramic coatings, sealants or other liquid protection products on vehicles. Whether you're a pro coater or a keen home detailer – the right applicator cloth is a must for a good result.\u003c\/p\u003e\n\n\u003cp\u003eFor \u003cstrong\u003ebeginners and home detailers\u003c\/strong\u003e we'd suggest the 20×20 cm format to start: big enough for quick application on bodywork, handy enough for precise control. Always order more cloths than you think you'll need – on your first coating you learn fast that you burn through one or two cloths per car, especially working with a new product.\u003c\/p\u003e\n\n\u003cp\u003eA practical note on storage: suede cloths should be kept dry and cool – ideal storage is under 20°C and out of direct sunlight. Unused cloths keep indefinitely when stored right. Cloths that have been used but aren't fully saturated yet can go in an airtight zip bag for up to 24 hours and be used again after – as long as the coating hasn't fully cured. Once the coating residue in the cloth has cured fully, though, it's done and should be binned. So plan for enough cloths on bigger coating jobs and order a few too many rather than too few.\u003c\/p\u003e\n\n\u003cp\u003eFor \u003cstrong\u003eprofessional coaters\u003c\/strong\u003e we'd suggest a mixed stock: several 20×20 cloths for the main panels, a few 10×10 cloths for details, and one or two 40×40 cloths for especially large surfaces or for coatings with a longer working time. The \u003ca href=\"https:\/\/www.detailing1.de\/collections\/gyeon-zubeh%C3%B6r\"\u003efull GYEON Q²M accessory range\u003c\/a\u003e at Detailing1 rounds the Q²M Suede out with every other tool for a professional coating session – from applicator blocks and microfibre cloths through to protective gear.\u003c\/p\u003e\n\n\u003cp\u003eFor more on getting coating application right and picking the right GYEON coating, check the \u003ca href=\"https:\/\/www.detailing1.de\/blogs\/detailing101\"\u003eDetailing101 blog\u003c\/a\u003e from Detailing1.\u003c\/p\u003e\n\n\u003cblockquote\u003e\n\u003cp\u003e\u003cstrong\u003ePro tip:\u003c\/strong\u003e Never leave your Q²M Suede out in the open after use. Ceramic coating residue cures on contact with air and turns the cloth stiff and useless within minutes. Seal it in an airtight plastic bag straight after use – or bin it outright once the cloth is fully saturated. A set of Q²M Suede in several formats is money well spent for a coating session.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n","brand":"GYEON","offers":[{"title":"40x40 cm \/ 2 pieces","offer_id":57335283188047,"sku":"D1-GYEON-Q2MSUEDE40","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"10x10 cm \/ 10 pieces","offer_id":57335280238927,"sku":"D1-GYEON-Q2MSUEDE10","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"20x20 cm \/ 10 pieces","offer_id":57335283155279,"sku":"D1-GYEON-Q2MSUEDE20","price":18.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/GYEON-Q_M_Suede_Wildledertuch-10x10_cm_10_Stuck.png?v=1775057004"},{"product_id":"gyeon-q2m-coating-applicator","title":"Q²M CoatingApplicator","description":"\u003ch2\u003eApply ceramic coatings precisely and evenly — GYEON Q²M CoatingApplicator in Big and Light\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the GYEON Q²M CoatingApplicator? A dedicated applicator for laying down ceramic coatings and spray sealants like a pro — available in two sizes: Big for full-blown long-term coatings with maximum coverage, Light for spray sealants and lighter coatings with controlled dosing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eNot every coating problem comes down to the product itself. Work with the wrong applicator and you're either fighting high spots — those milky, hazy patches from laying the coating on too thick — or uneven coverage that only shows up once everything has cured. Both mistakes cost you rework, product and patience. The \u003cstrong\u003eGYEON Q²M CoatingApplicator\u003c\/strong\u003e heads that off: not by magic, but through materials and sizing that are dialled in to make the coating go down the same way every time, with room for error. GYEON offering two versions — Big and Light — isn't a marketing gimmick; it's a clean split by job: heavy ceramic coatings want a different applicator than light spray sealants.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBig\u003c\/strong\u003e version is the classic pro applicator, with a velour face and a defined foam core for full-blown SiO₂ and TiO₂ ceramic coatings like the \u003ca href=\"\/en\/products\/gyeon-q2-mohs-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² Mohs EVO\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2-one-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² One EVO\u003c\/a\u003e. The \u003cstrong\u003eLight\u003c\/strong\u003e version is deliberately slimmer and more compact — built for spray sealants like \u003ca href=\"\/en\/products\/gyeon-q2m-cure-redefined-keramik-spruehversiegelung\"\u003eQ²M Cure\u003c\/a\u003e, light topcoats and detailing sprays, where an applicator that soaks up too much leads to over-application.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBig: velour face for minimal product release on full coatings.\u003c\/strong\u003e The velour surface on the Big holds liquid coatings in a buffer zone near the contact face and releases them in a very thin, even layer as you wipe. That's the key to dodging high spots — you lay down less coating per pass but still get full coverage. For the Q² line of ceramic coatings, that trait is non-negotiable.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight: slim profile for metered spray-sealant application.\u003c\/strong\u003e The Light is deliberately thinner than the Big. That cuts product uptake right down, so low-viscosity sprays and light sealants go on thin and exactly where you want them. The upshot: less product burned, a more even finish and less wiping — you feel it most with spray sealants, which spot as they dry if you over-apply.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-packs and 10-packs for every need.\u003c\/strong\u003e The Big comes in a 2-pack for the occasional detailer and a 10-pack for the pro operation. The Light comes in a 10-pack — exactly what detailers want when they use each applicator only once. Pros grab a fresh applicator for every panel to keep dried coating residue and cross-contamination out of the picture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e When you're laying down a coating, never dump too much product straight onto the applicator — drop by drop is the way to go. On the Big, 4–6 drops of a ceramic coating cover a car door; on the Light, 2–3 drops of a spray sealant are plenty. Spread the product evenly across the applicator face first, then start on the paint. Work panel by panel and always wipe before you move to the next one — coating that flashes off for too long won't come off cleanly anymore.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eApplying ceramic coating — why Big and Light give you different results\u003c\/h3\u003e\n\n\u003cp\u003eWhy do you need two versions of the \u003cstrong\u003eGYEON Q²M CoatingApplicator\u003c\/strong\u003e at all? It comes down to the viscosity of the products. Full ceramic coatings like Q² Mohs EVO, Q² One EVO or \u003ca href=\"\/en\/products\/gyeon-q2-syncro-evo-paint-coating-2-stufige-keramikversiegelung-lack\"\u003eQ² Syncro EVO\u003c\/a\u003e sit at medium to higher viscosity — you have to spread enough of them across the surface so the coating cross-links evenly and builds a proper protective layer. Thanks to its velour face, the Big picks these coatings up in a controlled way and releases just the right amount.\u003c\/p\u003e\n\n\u003cp\u003eSpray sealants and light topcoats behave completely differently: they're low-viscosity, spread easily on their own and need a very thin layer to bond well. Reach for the Big here and the bulkier foam core soaks up more product than you need. The result: over-application, spotting as it dries and higher consumption. The Light heads that off — its smaller reservoir empties more evenly and hands you full control over film thickness.\u003c\/p\u003e\n\n\u003cp\u003eOne thing plenty of people underrate: consistency across a whole car. Coat a full vehicle in spray sealant and, depending on size, you're making 20 to 30 passes. With an applicator that's too bulky and unloads differently depending on how saturated it is, you'll inevitably get swings in film thickness — visible as it dries in the sun. The Light keeps that to a minimum, while the Big plays to its strength on ceramic coatings: even, repeatable release across bigger panels.\u003c\/p\u003e\n\n\u003cp\u003eTemperature and humidity matter with both versions. On hot days (over 25 °C) or in direct sun, the coating dries on the applicator faster than you can spread it. In conditions like that the Light really pays off: since it holds less product, the coating doesn't get stranded in the foam early. With the Big, when it's hot, work even smaller sections and drop the number of drops per panel.\u003c\/p\u003e\n\n\u003cp\u003eAnother thing people underrate: don't just set the applicator aside to reuse once it's dried out and full of coating residue. Cured coating particles in the velour fibre or the foam can scratch freshly prepped paint next time round. That's why it pays to keep plenty of applicators on hand — Big and Light alike. In a pro setting the rule of thumb is: a fresh applicator per side of the car, or at least per coating session.\u003c\/p\u003e\n\n\u003ch3\u003eUsing the Q²M CoatingApplicator right — a workflow for a flawless application\u003c\/h3\u003e\n\n\u003cp\u003eA good coating job starts with proper prep: the paint has to be clean, decontaminated, polished (if needed) and degreased — with something like \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e. The coating only bonds properly once the surface is completely free of grease, oil and polishing residue. Keep the room temperature between 10 and 25 °C, no direct sun — that slows the flash-off and buys you more working time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWorkflow with the Big:\u003c\/strong\u003e Drop the coating straight onto the velour face — 4–6 drops for a standard panel like a car door. Spread the coating briefly across the applicator face, then draw it onto the paint in overlapping strips: horizontal first, then vertical, so you cover every spot. Keep the pressure light and even. For big areas like the bonnet or roof, split the surface into sections — do the top half, let it flash, wipe, then the bottom half. That way you never lose control of the timing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWorkflow with the Light:\u003c\/strong\u003e Put 2–3 drops of the spray sealant or light coating on the applicator. Or spray the product straight onto the surface and spread it evenly with the Light — handy on big body panels. Work in overlapping, straight passes over an area of 30 × 30 to 50 × 50 centimetres. Skip circular motions — on sealants they can leave uneven layers.\u003c\/p\u003e\n\n\u003cp\u003eDepending on the coating and the temperature, you'll get a flash-off time of 30 seconds to 3 minutes before you wipe with a fresh \u003ca href=\"\/en\/products\/gyeon-q2m-baldwipe-evo\"\u003eQ²M BaldWipe EVO\u003c\/a\u003e. The exact timing is in the instructions for the coating you're using — sticking to it isn't optional, it's a must. Work panel by panel, never coat the whole car at once. Once the coating's done: either bin the applicator or clean the residue off straight away with IPA — in a pro setting GYEON recommends single use.\u003c\/p\u003e\n\n\u003ch3\u003eWhere to use them — which version for which product and which surface\u003c\/h3\u003e\n\n\u003cp\u003eThe split is simple: \u003cstrong\u003eBig for anything that protects long-term and cures.\u003c\/strong\u003e That covers all the liquid coatings in the GYEON Q² line — \u003ca href=\"\/en\/products\/gyeon-q2-mohs-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² Mohs EVO\u003c\/a\u003e, \u003ca href=\"\/en\/products\/gyeon-q2-one-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² One EVO\u003c\/a\u003e, \u003ca href=\"\/en\/products\/gyeon-q2-pure-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² Pure EVO\u003c\/a\u003e, \u003ca href=\"\/en\/products\/gyeon-q2-syncro-evo-paint-coating-2-stufige-keramikversiegelung-lack\"\u003eQ² Syncro EVO\u003c\/a\u003e and more. Coatings from other makers with similar viscosity work too. The Big suits paint, roof, bonnet, doors, wings and painted wheels.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eLight for anything that goes on thin and fast.\u003c\/strong\u003e Spray sealants like \u003ca href=\"\/en\/products\/gyeon-q2m-cure-redefined-keramik-spruehversiegelung\"\u003eQ²M Cure\u003c\/a\u003e, light topcoats, detailing sprays and trim coatings like \u003ca href=\"\/en\/products\/gyeon-q2-trim-evo-ceramic-trim-restorer-protectant-keramikversiegelung-kunststoff\"\u003eQ² Trim EVO\u003c\/a\u003e. The Light really shines on small areas: mirrors, door handles, window frames, plastic trim. It's got an edge on vertical panels too: since it takes up less product, it runs less easily on doors and wings — a real difference between a clean finish and runs.\u003c\/p\u003e\n\n\u003cp\u003eThe CoatingApplicator isn't ideal for very pasty products like waxes — for those the \u003ca href=\"\/en\/products\/gyeon-q2m-block-applicator-evo\"\u003eQ²M Block Applicator EVO\u003c\/a\u003e is the better call, since its material is built for creamy consistencies. Not for glass coatings either (there are more specific applicators for that), and go carefully on matte paint — there, always use the coating made for matte surfaces and check the product instructions for applicator recommendations.\u003c\/p\u003e\n\n\u003cp\u003eThe Light works for interior jobs as well: applying synthetic-leather dressings or thin protective coatings on the dash and door cards, the more compact foam lets you work into recesses and along seams — spots where a bigger applicator always leaves too much product behind. It's got the edge over the bigger Big on \u003ca href=\"\/en\/products\/gyeon-q2-rim-evo-ceramic-rim-coating-keramikversiegelung-felgen\"\u003eQ² Rim EVO\u003c\/a\u003e wheel coatings too, where you need to work precisely in hard-to-reach spoke areas.\u003c\/p\u003e\n\n\u003cp\u003eThe honest limit: on very big vehicles like vans with sprawling panels, the coating will flash off faster than you can wipe if you take on too much at once. Working in smaller sections is what matters here — whether you're on the Big or the Light.\u003c\/p\u003e\n\n\u003ch3\u003eComparison — CoatingApplicator Big vs. Light vs. Block Applicator EVO\u003c\/h3\u003e\n\n\u003cp\u003eThe GYEON range has several applicators that look alike at first glance but are built differently. The \u003cstrong\u003eQ²M CoatingApplicator Big\u003c\/strong\u003e is the specialist for full ceramic coatings: its velour surface is built for thin, controlled release of medium- to higher-viscosity coatings. It takes up more product and spreads it evenly over bigger areas — ideal for 9H ceramic coatings, which need enough material to cross-link.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eQ²M CoatingApplicator Light\u003c\/strong\u003e is more compact, with a fine-pored foam that takes up less product. That's an advantage with low-viscosity spray sealants, since over-application is the most common problem with light sealants. Its smaller reservoir empties more evenly — you set the film thickness directly through the amount of product you put down, without the applicator stepping in as an unpredictable buffer.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e\u003ca href=\"\/en\/products\/gyeon-q2m-block-applicator-evo\"\u003eQ²M Block Applicator EVO\u003c\/a\u003e\u003c\/strong\u003e, by contrast, has a foam surface with no velour — it's the better fit for waxes, polymer sealants and higher-viscosity products with a creamy consistency. The \u003cstrong\u003e\u003ca href=\"\/en\/products\/gyeon-q2m-mf-applicator-evo\"\u003eQ²M MF Applicator EVO\u003c\/a\u003e\u003c\/strong\u003e, in turn, has a microfibre surface for an especially gentle application on delicate surfaces. The differences sound subtle, but in practice they make a measurable one: coatings laid down with the wrong applicator are harder to spread evenly, flash off unevenly and take more rework.\u003c\/p\u003e\n\n\u003cp\u003eAlternatives from other brands cover the same basics but aren't tuned specifically to the viscosity and chemistry of the GYEON coating line. When GYEON developed both CoatingApplicator versions, they built them around the exact demands of their own products — and it shows in the foam density, the velour fibre density and the geometry. Anyone looking after a range of cars, with both heavy long-term coatings and light spray sealants in the mix, will quickly find that Big and Light each earn their fixed spot in the kit — not a stand-in for each other, but two specialised tools for two different jobs.\u003c\/p\u003e\n\n\u003ch3\u003eBuying the CoatingApplicator — which version and pack size fits you\u003c\/h3\u003e\n\n\u003cp\u003eChoosing between Big and Light comes straight down to which products you lay down regularly. If you work exclusively with full ceramic coatings, the Big is the right call. If you're mostly on spray sealants and light topcoats, grab the Light. Plenty of pro detailers deliberately keep both in the kit — that's not redundancy, it's proper specialisation for the best result with every type of product.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBig 2-pack\u003c\/strong\u003e is ideal for the owner detailing their own car who lays down one or two coatings a year. With two applicators you can keep separate ones for paint and wheels without carrying coating residue over. The \u003cstrong\u003eBig 10-pack\u003c\/strong\u003e pays off for pro detailers coating several cars regularly — a fresh applicator for every panel, without waiting on more mid-job. The per-unit saving in the 10-pack is a noticeable one.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eLight 10-pack\u003c\/strong\u003e is aimed at detailers working with spray sealants professionally or semi-professionally, who rely on a consistent, repeatable result. Fresh applicator per car, no cleaning, no drop in quality from reused foam. It makes sense for the keen home user with a few cars in the household too — the unused applicators stay dust-free in the sealed bag and ready to go for months.\u003c\/p\u003e\n\n\u003cp\u003eA practical tip for prep: lay out every applicator you'll need before you start the coating — you don't want to be hunting mid-job or folding and improvising with a saturated one. Pros often have three to five applicators pre-folded and ready before the first drop of coating hits the first applicator. Together with proper prep — \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e to degrease and a fresh \u003ca href=\"\/en\/products\/gyeon-q2m-baldwipe-evo\"\u003eQ²M BaldWipe EVO\u003c\/a\u003e to wipe down — the CoatingApplicator is the pro-grade starter for your application that turns a good coating into a perfect result.\u003c\/p\u003e\n","brand":"GYEON","offers":[{"title":"2 pieces \/ Big","offer_id":57335285055823,"sku":"D1-GYEON-Q2MCOATAPP2","price":14.0,"currency_code":"EUR","in_stock":true},{"title":"10 pieces \/ Big","offer_id":57335286104399,"sku":"D1-GYEON-Q2MCOATAPP10","price":66.0,"currency_code":"EUR","in_stock":true},{"title":"10 pieces \/ Light","offer_id":57419392024911,"sku":"D1-GYEON-Q2MCOATLT10","price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/GYEON-Q_M_Coating_Applicator.png?v=1775056750"},{"product_id":"zvizzer-applikator-block-applikator-pad","title":"Applicator Block Applicator Pad","description":"\u003ch2 id=\"speakable-headline\"\u003eLay sealant on by hand, thin and even\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eWhat is the ZviZZer Applicator Block? A two-layer foam applicator with a soft application side and a firm grip side that lays coatings, sealants, waxes and plastic care down thin and even by hand. It doesn't polish anything out and it removes no scratches — buffing off is the microfibre's job.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eThe ZviZZer Applicator Block\u003c\/strong\u003e is a handy application applicator from ZviZZer measuring 10 by 3 by 2 centimetres. It's built in two layers: the soft pad side lays the product evenly onto the surface, the firm side gives you grip in the hand. For sparingly dosed products like ceramic coatings, you wrap the low-absorption applicator cloth around the block.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandy block at 10 by 3 by 2 centimetres.\u003c\/strong\u003e The shape sits flat in your hand and runs cleanly along edges and body lines. The two layers split the jobs: soft side lays it down, firm side holds — so you dose with control instead of smearing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEven application with no wasted product.\u003c\/strong\u003e Wrapped in the applicator cloth, the block barely soaks anything up, so 10 to 15 drops of coating cover a whole side of the car. A bare foam sponge would just drink part of that away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable across many application runs.\u003c\/strong\u003e After wax or care jobs, wring the block out under running water and let it dry — that way one block easily takes 10 or more uses. Cured coatings are the exception: there the block stays tied to that one coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e The most common mistake is using a single applicator for everything. A block you use first for a coating and then for a wax drags cured residue and silicone oils into the next layer — the coating then bonds patchy. Set up a separate block per product type and mark it. And lay it on thin: two cross passes per section are enough. What we see day-to-day, most failed coatings don't fail on the product but on a contaminated applicator.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eWrap it in cloth, two cross passes per section\u003c\/h3\u003e\n\u003cp\u003eYou set the applicator block into the low-absorption applicator cloth and pull two overlapping cross passes per section — first lengthwise, then across, so no gap is left.\u003c\/p\u003e\n\u003cp\u003eThe condition is a clean, dry and degreased surface. For coatings you put 10 to 15 drops onto the wrapped \u003ca href=\"\/en\/products\/zvizzer-applikator-tuecher-weiss-applikatortuecher\"\u003eapplicator cloth\u003c\/a\u003e, work panel by panel and let it flash off for 1 to 3 minutes before you buff with a fresh microfibre. Work briskly — otherwise the coating dries on and pulls streaks.\u003c\/p\u003e\n\u003cp\u003eWith waxes and plastic care, the soft pad side can also go straight onto the material without a cloth. A thin, even layer is enough; after a short flash-off, follow up by hand with microfibre. Other \u003ca href=\"\/en\/collections\/zubehoer\"\u003eaccessories\u003c\/a\u003e like fresh microfibre cloths belong to the same step.\u003c\/p\u003e\n\u003ch3\u003eIt lays on, it doesn't polish\u003c\/h3\u003e\n\u003cp\u003eThe applicator block is a pure application tool: it spreads product evenly, but it removes no scratches, swirls or oxidation and it doesn't take the product off at the end.\u003c\/p\u003e\n\u003cp\u003eDefects belong before the applicator: correction and gloss are the job of a machine polish like the prep one-step polish ahead of the \u003ca href=\"\/en\/products\/zvizzer-paint-ceramic-coat-keramikversiegelung\"\u003eceramic sealant\u003c\/a\u003e, and buffing off the applied layer is the job of a clean microfibre. The block sits neatly in between — it brings the protective layer onto the prepped panel.\u003c\/p\u003e\n\u003cp\u003eThe second clear limit is cross-contamination. Once a coating has cured on the block, it can't be washed out fully anymore — then the block belongs to the coating and no longer to the wax. Keep things cleanly separated and one block lasts a long time. Mix them and you ruin the next sealant.\u003c\/p\u003e\n\u003ch3\u003eFor anyone laying on coatings and waxes\u003c\/h3\u003e\n\u003cp\u003eThe applicator block is the right call for anyone applying sealants, coatings, waxes or tyre care by hand who wants a controlled, even result with no wasted product.\u003c\/p\u003e\n\u003cp\u003eIt makes less sense for pure machine work: if you only polish, you need thermo foam pads, not a hand applicator. And for taking a polish off, a microfibre is the right tool, not the block. We often get questions from beginners about whether their first coating application by hand will come out right — with a block plus cloth and a thin coat, that's one of the most forgiving spots in the whole coating process.\u003c\/p\u003e\n\u003cp\u003eThe ZviZZer Ceramic Coatings sets each include one block plus cloth. If you want to apply several products separately, or you're replacing a worn-out block, you buy it here as a single piece. The one trick no manufacturer writes down: label your blocks by product — a felt-pen dot on the grip side saves you the detective work later when a sealant unexpectedly blotches.\u003c\/p\u003e","brand":"ZviZZer","offers":[{"title":"10 × 3 × 2 cm \/ 1 Stück \/ Einzeln","offer_id":57867609047375,"sku":"D1-ZVIZZER-CB00121","price":2.9,"currency_code":"EUR","in_stock":false},{"title":"10 × 3 × 2 cm \/ 1 Stück \/ 3er-Set","offer_id":57882254672207,"sku":"D1-ZVIZZER-CB00121_3","price":8.7,"currency_code":"EUR","in_stock":false},{"title":"10 × 3 × 2 cm \/ 1 Stück \/ 10er-Set","offer_id":57882254704975,"sku":"D1-ZVIZZER-CB00121_10","price":29.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/zvizzer-applikator-block-applikator-pad.png?v=1780785034"},{"product_id":"zvizzer-applikator-tuecher-weiss-applikatortuecher","title":"Applicator Cloths white Applicator Towels","description":"\u003ch2 id=\"speakable-headline\"\u003eLay your coating onto the paint clean and lint-free\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eWhat are the ZviZZer Applicator Cloths white? Soft, lint-free suede cloths in a pack of 50 that let you lay ceramic coatings and sealants down thin and even. The short, dense fibre soaks up little product and drops no lint into the fresh film. They're a consumable, not a buffing cloth for removal and not a cleaning cloth.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eThe ZviZZer Applicator Cloths white\u003c\/strong\u003e are soft, lint-free \u003cstrong\u003eapplicator towels\u003c\/strong\u003e from ZviZZer made of short-pile suede microfibre, sized 15 by 10 centimetres and supplied as a pack of 50. You wrap one cloth around the applicator block and put a few drops of coating on it — the dense, low-pile fibre spreads the product in a thin, even wet film without soaking it up and without leaving fibres in the film. That's how you lay a coating down in a controlled, streak-free way.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLint-free instead of fibres in the coating.\u003c\/strong\u003e Unlike a fluffy microfibre towel, the short-pile suede fibre drops no lint that would otherwise lodge in the curing coating. Just 1 trapped fibre in the finished film forces you to re-polish the whole section. That's exactly what these cloths are made for — not drying or cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 cloths as a consumable.\u003c\/strong\u003e The pack of 50 lasts for plenty of coating jobs, since you swap the cloth roughly every three to four sections. Per car you'll go through several cloths depending on the coating and the state of the paint, because a cloth that's gone tacky no longer lays down cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 by 10 centimetres wrapped around the block.\u003c\/strong\u003e The format fits around the applicator block and gives you three usable faces. The low pile soaks up little product, so more coating ends up on the paint instead of disappearing into the cloth. Twelve to eighteen drops are enough depending on the size of the panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e The most common mistake when laying down a coating is dragging the same cloth across the whole car. As soon as the coating dries into the cloth, it just pushes product along in front of it and pulls streaks instead of an even film. Put twelve to eighteen drops on the cloth, work in straight, overlapping passes plus a cross pass, and grab a fresh one after three to four sections. With us, a cloth used too long on the bonnet left visible high spots that we had to polish back.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eCloth around the block coating on apply in passes\u003c\/h3\u003e\n\u003cp\u003eWrap an applicator cloth around the applicator block, put twelve to eighteen drops of coating on the cloth face and apply in straight, overlapping passes, then once across as a cross pass for an even film.\u003c\/p\u003e\n\u003cp\u003eThe block gives the soft cloth the even pressure it needs so the coating goes onto the paint in a thin wet film. Wrap the cloth tightly around the \u003ca href=\"\/en\/products\/zvizzer-applikator-block-applikator-pad\"\u003eapplicator block\u003c\/a\u003e so no creases pull streaks. You need paint that's clean, polished and degreased with isopropanol — on a greasy surface the coating levels unevenly.\u003c\/p\u003e\n\u003cp\u003eWork panel by panel and watch the film: when the wet trail goes matte, the coating has flashed off and you buff it out with a fresh, soft microfibre cloth. Swap the applicator cloth after about three to four sections, as soon as it feels tacky. Wash the cloths before first use and work with them dry.\u003c\/p\u003e\n\u003ch3\u003eYes for applying no for buffing out\u003c\/h3\u003e\n\u003cp\u003eThe applicator cloths are a pure application tool for liquid coatings and sealants — to take off the flashed film and buff it out you need a separate, soft microfibre cloth, not the suede cloth.\u003c\/p\u003e\n\u003cp\u003eTheir core job is the controlled coating application: a thin, even wet film with no trapped fibres. On a freshly polished and degreased door you lay a clean layer of the \u003ca href=\"\/en\/products\/zvizzer-graphene-ceramic-coat-keramikversiegelung\"\u003eGraphene Ceramic Coat ceramic sealant\u003c\/a\u003e with block and cloth, which the suede spreads evenly instead of pulling it off like an absorbent towel would.\u003c\/p\u003e\n\u003cp\u003eThe limits are clear: if a liquid coating needs to go on thin and lint-free, then the suede applicator cloth. If the dried film needs taking off or buffing to a high gloss, then a fluffy microfibre cloth. A cloth that's gone tacky is spent and should be swapped, not washed out and reused — otherwise it pulls streaks into the next section.\u003c\/p\u003e\n\u003ch3\u003eFor the coating user not for the quick wash\u003c\/h3\u003e\n\u003cp\u003eThe applicator cloths are the right call when you apply a ceramic coating or a liquid sealant yourself and need an application medium that swallows little product and leaves no lint in the film.\u003c\/p\u003e\n\u003cp\u003eThey're the consumable in the coating workflow and part of our \u003ca href=\"\/en\/collections\/zubehoer\"\u003eaccessory range\u003c\/a\u003e. Block and cloth go together: the block brings the pressure, the cloth the lint-free face. With the pack of 50 you've got enough in reserve to switch to a fresh cloth in time on every job, instead of pushing on with a tacky one and risking high spots.\u003c\/p\u003e\n\u003cp\u003eThey're less suited to anything other than applying: not for drying the car, not for cleaning, not for buffing out. If you only wash your car and never apply a liquid coating, you don't need them — they're a specialist tool for sealing.\u003c\/p\u003e\n\u003cp\u003eThe one thing most people underrate: with a coating, the cloth decides half the result. A fresh, lint-free suede cloth per section costs a few cloths more, but it saves you re-polishing streaks and trapped fibres that otherwise stay in the cured coating for good. That's exactly why there are 50 in the pack and not five.\u003c\/p\u003e","brand":"ZviZZer","offers":[{"title":"15 × 10 cm \/ 50 Stück \/ Einzeln","offer_id":57867609080143,"sku":"D1-ZVIZZER-CA00122","price":33.42,"currency_code":"EUR","in_stock":false},{"title":"15 × 10 cm \/ 50 Stück \/ 3er-Set","offer_id":57882254803279,"sku":"D1-ZVIZZER-CA00122_3","price":100.26,"currency_code":"EUR","in_stock":false},{"title":"15 × 10 cm \/ 50 Stück \/ 10er-Set","offer_id":57882254836047,"sku":"D1-ZVIZZER-CA00122_10","price":334.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/zvizzer-applikator-tuecher-weiss-applikatortuecher.png?v=1780785036"},{"product_id":"innovacar-micron-suede-wildleder-mikrofasertuch","title":"\"Micron Suede\" Suede Microfibre Cloth","description":"\u003ch2 id=\"speakable-headline\"\u003eCoatings gleichmäßig und sparsam auftragen — dank Wildleder-Mikrofaser\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eDas „Micron Suede\" von Innovacar ist ein Wildleder-Mikrofasertuch (200 GSM) für den gleichmäßigen, sparsamen Auftrag von Keramik-Coatings und Nano-Versiegelungen. Weil es wenig Produkt aufsaugt, verteilst du das teure Coating gleichmäßig statt es zu vergeuden. Kein Reinigungs- oder Trockentuch — dafür saugt es zu wenig.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eInnovacar „Micron Suede\"\u003c\/strong\u003e ist das Microsuede-Tuch für die Coating-Anwendung. Anders als saugstarke Plüsch-Mikrofaser nimmt das glatte Wildleder-Gewebe nur wenig Flüssigkeit auf — und genau das ist beim Coating-Auftrag der Vorteil: Das Produkt bleibt an der Oberfläche verfügbar, statt im Tuch zu verschwinden, und lässt sich hauchdünn und gleichmäßig verteilen. Randlos und ultraschallgeschnitten, ohne Nähte und Etiketten. Heißt für dich: keine Coating-Verschwendung, ein gleichmäßiger Film ohne Schlieren und keine harte Kante am frisch beschichteten Lack.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSparsamer, gleichmäßiger Coating-Auftrag.\u003c\/strong\u003e Das saugarme Gewebe hält das Produkt an der Oberfläche — du verteilst dünn und gleichmäßig. Praktisch: mehr Anwendungen aus einer teuren Coating-Flasche.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal für Keramik und Nano-Versiegelung.\u003c\/strong\u003e Genau das Werkzeug für kontrollierte, dünne Schichten. Heißt für dich: kein High-Spot-Risiko durch zu viel Produkt im Tuch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 GSM, randlos, lasergeschnitten.\u003c\/strong\u003e Feines Microsuede ohne kratzende Kante. Im Alltag: sicher auf empfindlichem, frisch poliertem Lack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003ePraxistipp von Detailing1:\u003c\/strong\u003e Beim Coaten falten wir das „Micron Suede\" um einen Applikatorblock und arbeiten Panel für Panel in Kreuzbahnen — so verteilt sich das Produkt gleichmäßig und man sieht sofort, welche Fläche schon behandelt ist. Wichtig: Ein coating-getränktes Suede-Tuch ist ein Einwegartikel. Die Nano-Chemie härtet im Gewebe aus und macht es hart — nach der Anwendung entsorgen, nicht waschen und wiederverwenden.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eAnwendung: Um den Block, Coating auftropfen, Kreuzbahnen\u003c\/h3\u003e\n\u003cp\u003eWickle das \u003cstrong\u003e„Micron Suede\"\u003c\/strong\u003e um einen Applikatorblock wie den \u003ca href=\"\/en\/products\/innovacar-foam-app-block-nano-applikator\"\u003e„Foam App Block\"\u003c\/a\u003e, tropfe wenige Tropfen Coating auf und trage in Kreuzbahnen dünn auf — z. B. \u003ca href=\"\/en\/products\/innovacar-sinh-hybrid-coat-keramikversiegelung\"\u003e„SINH\" Hybrid Coat\u003c\/a\u003e oder \u003ca href=\"\/en\/products\/innovacar-sinh-top-coat-keramikversiegelung\"\u003e„SINH\" Top Coat\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGrenzen: Kein Saugtuch\u003c\/h3\u003e\n\u003cp\u003eDas Wildleder-Gewebe saugt bewusst wenig — zum Abnehmen von Politurresten oder zum Trocknen ist es die falsche Wahl. Dafür nimmst du das plüschige \u003ca href=\"\/en\/products\/innovacar-micron-buffing-poliertuch\"\u003e„Micron Buffing\"\u003c\/a\u003e oder das \u003ca href=\"\/en\/products\/innovacar-micron-2face-mikrofasertuch\"\u003e„Micron 2Face\"\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHinweis: Einwegartikel\u003c\/h3\u003e\n\u003cp\u003eCoating-getränkte Tücher härten aus und lassen sich nicht sinnvoll waschen. Für unbenutzte Tücher gilt: Maschinenwäsche bei max. 30 °C mit \u003ca href=\"\/en\/products\/innovacar-sm-micron-shampoo-mikrofaser-waschmittel\"\u003e„SM\" Micron Shampoo\u003c\/a\u003e.\u003c\/p\u003e","brand":"INNOVACAR","offers":[{"title":"1 Stück \/ 40 x 40 cm \/ Grau","offer_id":58163105825103,"sku":"D1-INC-79463","price":4.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/panno-microsuede-microfibra-scamosciata-auto-micron-suede-innovacar.jpg?v=1783460433"},{"product_id":"innovacar-micron-suede-mini-mikrofasertuch-10er-pack","title":"\"Micron Suede\" Mini Microfibre Cloth (Pack of 10)","description":"\u003ch2 id=\"speakable-headline\"\u003eCoatings präzise auftragen — 10 kleine Suede-Tücher im Vorratspack\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eDie „Micron Suede\" Mini von Innovacar sind zehn kleine Wildleder-Mikrofasertücher (10 × 10 cm), gemacht für den präzisen Coating-Auftrag um einen Applikatorblock. Das saugarme Microsuede verteilt teure Keramik- und Nano-Versiegelungen dünn und gleichmäßig. Coating-getränkt sind sie Einwegartikel — der 10er-Pack ist genau darauf ausgelegt.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eInnovacar „Micron Suede\" Mini\u003c\/strong\u003e sind kleine Wildleder-Mikrofasertücher im praktischen 10er-Pack, speziell für den Coating-Auftrag entwickelt. Mit 10 × 10 cm passen sie exakt um einen Applikatorblock wie den \u003ca href=\"\/en\/products\/innovacar-foam-app-block-nano-applikator\"\u003e„Foam App Block\"\u003c\/a\u003e. Das Besondere am Microsuede: Es saugt nur wenig Produkt auf, sodass das teure Coating an der Oberfläche verfügbar bleibt und sich hauchdünn und gleichmäßig verteilen lässt — statt im Tuch zu verschwinden. Randlos und ultraschallgeschnitten, ohne kratzende Kante. Heißt für dich: kontrollierter, sparsamer Auftrag und ein frisches Tuch für jede Anwendung, ohne ein ausgehärtetes wiederverwenden zu müssen.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePräziser, sparsamer Coating-Auftrag.\u003c\/strong\u003e Das saugarme Microsuede verteilt Keramik- und Nano-Versiegelungen dünn und gleichmäßig. Praktisch: mehr Anwendungen aus einer teuren Coating-Flasche.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 × 10 cm — passt um den Block.\u003c\/strong\u003e Ideales Format für den „Foam App Block\". Heißt für dich: sicherer Halt, saubere Finger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10er-Pack für mehrere Coatings.\u003c\/strong\u003e Frisches Tuch pro Anwendung statt ausgehärtetes wiederverwenden. Im Alltag: der Vorrat reicht für ein ganzes Projekt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003ePraxistipp von Detailing1:\u003c\/strong\u003e Beim Coaten planen wir immer mehr Tücher ein, als man denkt — pro Fahrzeugseite eher ein frisches. Ein Suede-Tuch, das schon Coating gesehen hat, härtet innerhalb von Minuten an und zieht dann Schlieren statt gleichmäßig zu verteilen. Deshalb der 10er-Pack: lieber großzügig wechseln als am falschen Ende sparen und High Spots riskieren. Nach dem Auftrag wandert das Tuch in den Müll, nicht in die Wäsche.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eAnwendung: Um den Block wickeln, auftropfen, Kreuzbahnen\u003c\/h3\u003e\n\u003cp\u003eEin Tuch um den \u003ca href=\"\/en\/products\/innovacar-foam-app-block-nano-applikator\"\u003e„Foam App Block\"\u003c\/a\u003e wickeln, wenige Tropfen Coating auftropfen und in Kreuzbahnen dünn auftragen — z. B. \u003ca href=\"\/en\/products\/innovacar-sinh-hybrid-coat-keramikversiegelung\"\u003e„SINH\" Hybrid Coat\u003c\/a\u003e oder \u003ca href=\"\/en\/products\/innovacar-sinh-top-coat-keramikversiegelung\"\u003e„SINH\" Top Coat\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGrenzen: Coating-Werkzeug, kein Poliertuch\u003c\/h3\u003e\n\u003cp\u003eDas saugarme Microsuede ist zum Auftragen gemacht, nicht zum Auspolieren oder Trocknen — dafür das plüschige \u003ca href=\"\/en\/products\/innovacar-micron-buffing-poliertuch\"\u003e„Micron Buffing\"\u003c\/a\u003e. Und coating-getränkte Tücher sind Einwegartikel: ausgehärtet lassen sie sich nicht sinnvoll waschen.\u003c\/p\u003e\n\u003ch3\u003eKombiniert mit\u003c\/h3\u003e\n\u003cp\u003eDas perfekte Trio für den Coating-Auftrag: „Micron Suede\" Mini + \u003ca href=\"\/en\/products\/innovacar-foam-app-block-nano-applikator\"\u003e„Foam App Block\"\u003c\/a\u003e + eine „SINH\"-Versiegelung.\u003c\/p\u003e","brand":"INNOVACAR","offers":[{"title":"10 Stück \/ 10 x 10 cm \/ Grau","offer_id":58163108872527,"sku":"D1-INC-79474","price":9.52,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/panno-microsuede-piccolo-in-microfibra-scamosciata-auto-micron-suede-innovacar.jpg?v=1783460515"},{"product_id":"innovacar-foam-app-block-nano-applikator","title":"\"Foam App Block\" Nano Applicator","description":"\u003ch2 id=\"speakable-headline\"\u003eCoatings gleichmäßig auftragen — Applikatorblock mit doppelter Dichte\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eDer „Foam App Block\" von Innovacar ist ein Applikatorblock mit doppelter Dichte für den präzisen Coating-Auftrag — üblicherweise mit einem „Micron Suede\" Tuch umwickelt. Der festere Griff oben hält sicher, die weiche Unterseite verteilt gleichmäßig. Ein Werkzeug speziell fürs Coaten, kein Poliertuch und kein Waschschwamm.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eInnovacar „Foam App Block\"\u003c\/strong\u003e ist der Applikatorblock für den kontrollierten Auftrag nanotechnologischer Coatings. Das Prinzip: Du wickelst ein \u003ca href=\"\/en\/products\/innovacar-micron-suede-mini-mikrofasertuch-10er-pack\"\u003e„Micron Suede\"\u003c\/a\u003e Tuch um den Block und trägst damit das Coating auf. Der Block selbst hat eine doppelte Dichte — oben ein festerer Schaum, der sicheren Halt gibt und die Finger sauber hält, unten eine weichere Zone, die das Produkt gleichmäßig und mit konstantem Druck auf die Fläche bringt. Mit 9 × 4 × 2,5 cm liegt er ideal in der Hand. Heißt für dich: ein gleichmäßiger, streifenfreier Coating-Film — statt mit bloßen Fingern ungleichmäßig aufzutragen.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFür Keramik- und Nano-Coatings.\u003c\/strong\u003e Präziser, gleichmäßiger Auftrag mit konstantem Druck. Praktisch: kein fleckiger Film durch ungleichmäßige Finger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoppelte Dichte.\u003c\/strong\u003e Fester Griff oben, weiche Auftragsseite unten. Heißt für dich: sicherer Halt, saubere Hände.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 × 4 × 2,5 cm, mit Suede kombinierbar.\u003c\/strong\u003e Handliches Format fürs „Micron Suede\". Im Alltag: das Standard-Setup fürs Coaten.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003ePraxistipp von Detailing1:\u003c\/strong\u003e Ohne Block coatet bei uns niemand — mit bloßen Fingern verteilt man den Druck ungleichmäßig und bekommt Streifen. Der Block sorgt für konstanten, flächigen Druck, und das Suede-Tuch gleitet gleichmäßig. Wichtig: den Block sauber halten, das Tuch aber nach jeder Anwendung wechseln. Der Block ist wiederverwendbar, das coating-getränkte Suede-Tuch nicht.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eAnwendung: Suede umwickeln, auftropfen, Kreuzbahnen\u003c\/h3\u003e\n\u003cp\u003eEin \u003ca href=\"\/en\/products\/innovacar-micron-suede-mini-mikrofasertuch-10er-pack\"\u003e„Micron Suede\"\u003c\/a\u003e Tuch um den Block wickeln, wenige Tropfen Coating auftropfen und in Kreuzbahnen dünn auftragen — z. B. \u003ca href=\"\/en\/products\/innovacar-sinh-hybrid-coat-keramikversiegelung\"\u003e„SINH\" Hybrid\u003c\/a\u003e oder \u003ca href=\"\/en\/products\/innovacar-sinh-top-coat-keramikversiegelung\"\u003e„SINH\" Top Coat\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGrenzen: Coating-Werkzeug, sonst nichts\u003c\/h3\u003e\n\u003cp\u003eDer Block ist fürs Auftragen von Coatings gemacht — nicht zum Waschen und nicht zum Auspolieren. Zum Auspolieren nimmst du ein \u003ca href=\"\/en\/products\/innovacar-micron-buffing-poliertuch\"\u003e„Micron Buffing\"\u003c\/a\u003e, zum Waschen einen \u003ca href=\"\/en\/products\/innovacar-micron-wash-mitt-mikrofaser-waschhandschuh\"\u003eWaschhandschuh\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePflege\u003c\/h3\u003e\n\u003cp\u003eDen Block nach Gebrauch abspülen; das gebrauchte Suede-Tuch entsorgen.\u003c\/p\u003e","brand":"INNOVACAR","offers":[{"title":"1 Stück \/ 9 x 4 x 2,5 cm \/ Schwarz","offer_id":58163109822799,"sku":"D1-INC-79475","price":3.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/applicatore-per-nano-coating-auto-foam-app-block-innovacar_d5cfcbaf-38c5-4a3f-a7af-07a1c46b2bcc.jpg?v=1783460534"},{"product_id":"koch-chemie-applikatorblock-ceramic-keramikversiegelungen","title":"Applikatorblock \"Ceramic\" für Keramikversiegelungen","description":"","brand":"Koch-Chemie","offers":[{"title":"1 Stück \/ 90 × 40 × 24 mm","offer_id":58711366631759,"sku":"D1-KCX-999621","price":2.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-applikatorblock-ceramic-keramikversiegelungen.png?v=1788855664"}],"url":"https:\/\/detailing1.pl\/en\/collections\/coating-applikatoren.oembed","provider":"Detailing1","version":"1.0","type":"link"}