{"title":"Degreasing of GYEON","description":"\u003ch2\u003ePaint Preparation and Degreasing Before Ceramic Coating with GYEON Q²M\u003c\/h2\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cem\u003eWhat is paint degreasing before coating? Degreasing with GYEON Q²M products removes polishing oils, silicone residues, and grease films from the paint – an indispensable final step before applying any GYEON Q² ceramic coating to ensure maximum adhesion and uniform cross-linking.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eGYEON degreasing products\u003c\/strong\u003e from the Q²M line are the final cleaning step before ceramic coating. Even freshly polished paint carries invisible residues: polishing oils, lubricants, fingerprints, and silicone traces. These residues prevent uniform cross-linking of the coating with the clear coat – resulting in adhesion weaknesses, patchy coatings, or premature detachment. An IPA-based degreaser like GYEON Q²M Prep dissolves these contaminants and leaves an absolutely clean, adhesive surface. This step only takes a few minutes but significantly determines the quality of the coating result.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMandatory before every coating application.\u003c\/strong\u003e Without degreasing, there is no reliable coating adhesion. GYEON recommends an IPA wipe as a standard final step before every Q² product.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResidue-free and fast-drying.\u003c\/strong\u003e IPA-based degreasers evaporate without leaving residues and create an absolutely clean surface without damaging the paint.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy application.\u003c\/strong\u003e Spray onto a microfiber cloth, wipe evenly over the surface – done. No polishing, no waiting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Always work panel by panel when doing an IPA wipe – not the entire vehicle at once. The degreaser evaporates quickly; if you work on too large areas at once, it will evaporate before you can wipe it off. Use two separate cloths for degreasing: one for application, one for removing residues.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eGYEON Q²M Prep: How it Works and Its Use in the Coating Workflow\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGYEON Q²M Prep\u003c\/strong\u003e is an IPA-based (Isopropanol) degreaser used after paint correction and before coating application. IPA dissolves organic residues – greases, oils, waxes, and silicones – and evaporates without leaving any residue. In the direct coating workflow, this looks like: Pre-wash → Decontamination → Polishing (if necessary) → IPA wipe → Coating application. Skipping this step risks inconsistencies in the coating layer. This is particularly critical with professional-grade coatings like Q² Syncro, which are very sensitive to surface contamination.\u003c\/p\u003e\n\u003ch3\u003eBuy Degreaser: GYEON Q²M Prep and IPA Products at Detailing1\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAt Detailing1\u003c\/strong\u003e, you will find GYEON Q²M degreasing products as an essential part of the \u003ca href=\"\/en\/collections\/gyeon-q2-ceramic-coatings\"\u003eQ² coating workflow\u003c\/a\u003e. Combine with \u003ca href=\"\/en\/collections\/gyeon-q2m-polishing\"\u003eQ²M Polishing products\u003c\/a\u003e for the complete paint preparation workflow.\u003c\/p\u003e","products":[{"product_id":"gyeon-q2m-degrease-tabs-entfetter-konzentrat","title":"Q²M Degrease Tabs Degreaser Concentrate","description":"\u003ch2\u003eDegreasing in Bulk – GYEON Q²M Degrease Tabs\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat are GYEON Q²M Degrease Tabs? GYEON Q²M Degrease Tabs are highly concentrated degreaser tablets that, when dissolved in water, create a professional degreasing solution – ideal for surface preparation before coatings, paint polishing, and other detailing work.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eDegreasing is one of the most important preparatory steps before any coating or polishing work – and a step where the degreaser's concentration is crucial. \u003cstrong\u003eGYEON Q²M Degrease Tabs\u003c\/strong\u003e are an innovative tablet form of professional degreaser: the highly concentrated tablets are dissolved in water to create a ready-to-use degreasing solution. This saves packaging weight, space, and plastic – without compromising on professional degreasing effectiveness.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHighly Concentrated Tablets – One Tab Makes a Ready-to-Use Solution.\u003c\/strong\u003e Q²M Degrease Tabs are extremely concentrated: one tablet, dissolved in the correct amount of water, yields a professional degreasing solution with the same active ingredient concentration as liquid degreasers. Economical, space-saving, and environmentally friendly due to reduced packaging.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEffective Grease and Oil Removal for Residue-Free Surfaces.\u003c\/strong\u003e Q²M Degrease Tabs effectively remove grease, oils, silicone residues, and wax residues from the paint surface – a prerequisite for optimal adhesion of coatings, sealants, and polishes. Residue-free degreasing is key to long-lasting coating results.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMore Environmentally Friendly in Tablet Form – Less Plastic, Less Weight.\u003c\/strong\u003e The tablet form significantly reduces packaging plastic and saves weight during transport. A small container of Degrease Tabs replaces many liters of liquid degreaser – good for the environment and practical for detailers with limited storage space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e Use Q²M Degrease Tabs for large-area degreasing tasks – e.g., when an entire vehicle needs to be degreased before coating application. For final spot degreasing directly before coating, we recommend the \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e, which is alcohol-based – it evaporates residue-free and is ideal for small areas and final IPA wiping. Degrease Tabs and Q²M Prep complement each other perfectly for a complete degreasing routine.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eDegreaser in Detailing Preparation: Why this step is indispensable\u003c\/h3\u003e\n\u003cp\u003eBefore any coating work – whether ceramic coating, polymer sealant, or wax – the surface must be absolutely grease-free. Even the smallest grease or oil residues on the paint significantly reduce the adhesion of the coating: the coating forms islands instead of a uniform layer, hydrophobicity is uneven, and the durability of the coating decreases. Q²M Degrease Tabs make this step easy and efficient – mix a complete degreaser solution with one tab to cover the entire vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eApplication: How to use Q²M Degrease Tabs correctly\n\u003c\/h3\u003e\u003cp\u003eDissolve one tablet in the specified amount of water (observe dosage instructions on the packaging) and mix well until the tablet is completely dissolved. Apply the solution to the surface to be degreased with a clean microfiber cloth, let it sit, and then wipe off with a fresh, clean cloth. For complete vehicle preparation before a coating: first, use Degrease Tabs for large-area cleaning, then \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e as a final IPA wipe – this ensures the surface is absolutely free of all residues.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Degrease Tabs vs. Q²M Prep: Different roles in preparation\u003c\/h3\u003e\n\u003cp\u003eQ²M Degrease Tabs and \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e are not competitors, but rather complements. Degrease Tabs (water-based degreaser) are ideal for the first, large-area degreasing round – they efficiently remove grease, oils, and residues over large areas. Q²M Prep (alcohol-based degreaser, IPA) is the final degreasing step – it evaporates completely residue-free and is the last measure immediately before coating application. Together, they form a complete, two-stage degreasing routine.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of application for Q²M Degrease Tabs in everyday detailing\u003c\/h3\u003e\n\u003cp\u003eQ²M Degrease Tabs are used wherever thorough degreasing over larger areas is necessary: Before ceramic coating the entire vehicle, before polishing (removes wax residues that impair polishing pads), during interior detailing (degreasing plastics and leather before sealing), during engine bay cleaning as a pre-wash, and for cleaning polishing pads and tools.\u003c\/p\u003e\n\n\u003ch3\u003eRecommendation: Q²M Degrease Tabs for efficient vehicle preparation\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Degrease Tabs are the smart solution for anyone who needs to degrease regularly and efficiently – without having to store a large supply of liquid degreaser. The tablet form is practical, space-saving, and environmentally conscious. For a complete preparation kit, we recommend: Q²M Degrease Tabs for basic degreasing + \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e for the final IPA wipe + \u003ca href=\"\/en\/products\/gyeon-q2m-totalremover-wachs-coating-entferner\"\u003eQ²M TotalRemover\u003c\/a\u003e as needed for removing old coatings or wax layers before re-sealing.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"10x 2 pieces","offer_id":56981057896783,"sku":"D1-GYEON-Q2MTABS","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-degrease-tabs-entfetter-konzentrat.png?v=1770843398"},{"product_id":"gyeon-q2m-prep-entfetter-alkoholbasis","title":"Q²M Prep Alcohol-based Degreaser","description":"\u003ch2 id=\"speakable-headline\"\u003eResidue-free degreasing of paint with GYEON Q²M Prep before every sealant application\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M Prep? An alcohol-based paint degreaser from GYEON based on isopropanol, which removes polishing oils, wax residues, and silicone residues without leaving any trace — the essential preparation before every ceramic coating. Not suitable as an all-purpose cleaner or for removing heavy dirt such as tar or insect residues.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eGYEON Q²M Prep\u003c\/strong\u003e is a paint degreaser from GYEON, based on a formulation of 30–35% isopropanol, fat-dissolving anionic surfactants, and antistatic additives. The active ingredient isopropyl alcohol chemically dissolves polishing oils and wax residues from the paint surface and then evaporates without leaving any residue.\u003c\/p\u003e\n\n\u003cp\u003eWhat remains is an absolutely pure surface, on which a ceramic coating can achieve maximum adhesion. In the detailing workflow, Q²M Prep is the last step before coating application: the so-called IPA-wiping, which every coating manufacturer prescribes as a mandatory step.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-prep-hero-szene.jpg?v=1776015410\" alt=\"GYEON Q²M Prep bottle on polished dark paint in a professional detailing garage\" loading=\"lazy\" width=\"1024\" height=\"1024\" style=\"max-width:100%;height:auto;border-radius:2px\"\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEvaporates completely — zero residue between paint and coating.\u003c\/strong\u003e Water-based degreasers leave mineral traces on the surface after evaporation. Q²M Prep completely evaporates due to its high IPA content. A residue layer of only 0.5 µm can reduce coating adhesion by up to 40% — Q²M Prep eliminates this risk.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntistatic formulation against immediate re-contamination.\u003c\/strong\u003e After polishing, the paint surface is electrically charged and magnetically attracts dust. The antistatic additives in Q²M Prep neutralize this static charge. After wiping, you have a time window of 10–15 minutes during which the surface remains largely dust-free — this is enough for coating application on a complete panel. Without this antistatic component, you would have to wipe each panel again immediately before coating.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual function: Cleaning control between polishing stages.\u003c\/strong\u003e Polishing oils optically fill fine scratches and conceal defects in the clear coat. A wipe with Q²M Prep between polishing stages reveals whether the preliminary work is sufficient — or whether you need another pass with the compound. This control step takes 30 seconds per panel and, in the worst case, saves you a complete re-treatment after coating. Approximately 150 ml is sufficient for an entire vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Never spray Q²M Prep directly onto the paint — always onto a fresh, short-pile microfiber cloth. Direct spraying distributes the dissolved dirt over the surface instead of absorbing it. Use one cloth for application per paint panel and a second, dry one for buffing. Change the application cloth after 2–3 panels. If you only use one cloth and wipe in circular motions, you will spread polishing residues in a circle — the opposite of degreasing.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eExpose polishing oils instead of trapping them under the coating\u003c\/h3\u003e\n\u003cp\u003eQ²M Prep shows you the true condition of the paint after polishing. Polishing oils from compound and polish stages optically fill micro-scratches and fine holograms — the paint looks smooth and flawless under normal lighting. A single wipe with Q²M Prep removes these optical fillers and reveals what truly lies beneath the oil layer.\u003c\/p\u003e\n\n\u003cp\u003eThis control step is part of the workflow after every polishing stage: \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003ePaint polish\u003c\/a\u003e → Prep wipe → Control under LED light → Finish polish → Prep wipe → Final control → Coating. Without this intermediate step, you risk trapping defects under the coating.\u003c\/p\u003e\n\n\u003cp\u003eA ceramic coating like Q² Mohs EVO lasts 36 months — and the trapped holograms will be visible for just as long. Rework means: sanding off the coating, completely re-polishing, completely re-coating. The control wipe with Prep takes 30 seconds per panel and reliably prevents this worst-case scenario.\u003c\/p\u003e\n\n\u003cp\u003eFor control, you need an LED gooseneck lamp or a strong flashlight at a shallow angle of about 15–20 degrees to the surface. Spray Q²M Prep onto a \u003ca href=\"\/en\/products\/gyeon-q2m-bald-wipe-evo-mikrofasertuch-kurzflorig-350gsm\"\u003eshort-pile microfiber cloth\u003c\/a\u003e and wipe in straight lines across the panel. Check immediately under the light.\u003c\/p\u003e\n\n\u003cp\u003eStraight lines are crucial — no circular motions. Circles distribute dissolved residues on the surface instead of absorbing them into the cloth. If you still see dull spots or streaks after wiping, the surface is not clean enough for the coating. A second wipe with a fresh cloth will remedy this.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-prep-anwendung-szene.jpg?v=1776015414\" alt=\"Application of GYEON Q²M Prep with microfiber cloth on dark polished paint\" loading=\"lazy\" width=\"1024\" height=\"1024\" style=\"max-width:100%;height:auto;border-radius:2px\"\u003e\n\n\u003ch3\u003eFinish degreaser for coatings. Not an all-purpose cleaner.\u003c\/h3\u003e\n\u003cp\u003eQ²M Prep is formulated for a single purpose: the final cleaning stage before a coating. The mixture of 30–35% isopropanol and anionic surfactants is calibrated for polishing oils, carnauba wax, and silicone residues from spray sealants. The flash point is above 65 °C — making Q²M Prep not a hazardous material for shipping and uncritical for storage.\u003c\/p\u003e\n\n\u003cp\u003eThe orange oil in the formulation (less than 1% content) serves as a fragrance — Q²M Prep smells pleasantly mild instead of pure alcohol, which is particularly relevant when working in enclosed garages. The liquid's color is slightly pink, so you can immediately see where you have already wiped and where you haven't.\u003c\/p\u003e\n\n\u003cp\u003ePure isopropanol (100% IPA) would not be an equivalent alternative. It evaporates in seconds — too quickly to reliably dissolve polishing residues. The surfactants in Q²M Prep do the actual heavy lifting: they encapsulate oil molecules (emulsification) and detach them from the paint surface.\u003c\/p\u003e\n\n\u003cp\u003eIsopropanol acts as a solvent for waxes and silicones that surfactants alone cannot break down. Together, both mechanisms cover the entire spectrum of residues. The calibrated formulation gives you 15–30 seconds of working time on the surface before the product evaporates — enough for wiping, too little for paint damage.\u003c\/p\u003e\n\n\u003cp\u003eWhere Q²M Prep is not the right product: Tar and bitumen stains require a solvent-based tar remover. Insect residues need alkaline cleaners. Heavy grease contamination from the washing phase belongs to the Degrease Tabs, not the finish degreaser.\u003c\/p\u003e\n\n\u003cp\u003eQ²M Prep does not replace a cleaner — it comes after cleaning, after decontamination, and after polishing. Its sole purpose is the final degreasing stage. On untreated, matte aluminum or anodized metal, test in an inconspicuous area beforehand: The surfactants can leave streaks on rough, open-pored surfaces that are difficult to remove. Q²M Prep is also unnecessary on freshly waxed surfaces — those who wax want to build up a protective layer, not remove it.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-prep-detail-szene.jpg?v=1776015423\" alt=\"Close-up of a mirrored paint surface degreased with GYEON Q²M Prep\" loading=\"lazy\" width=\"1024\" height=\"1024\" style=\"max-width:100%;height:auto;border-radius:2px\"\u003e\n\n\u003ch3\u003e150 ml per vehicle. Three containers for every application.\u003c\/h3\u003e\n\u003cp\u003eFor a complete mid-range vehicle, you need about 150 ml of Q²M Prep — for an SUV or van, up to 200 ml. The 500 ml spray bottle is therefore sufficient for 2–3 complete vehicles, the 1-liter bottle for 5–6, and the 4-liter canister for around 25 vehicles in workshop use. The price per liter drops from €32 for the 500 ml bottle to €20 for the canister — those who regularly apply coatings should opt for the large container and transfer it into a spray bottle.\u003c\/p\u003e\n\n\u003cp\u003eQ²M Prep is not only suitable for paint. It is the standard before \u003ca href=\"\/en\/products\/gyeon-q2-mohs-evo-paint-coating-keramikversiegelung-lack\"\u003eceramic coatings\u003c\/a\u003e on paint, but it works just as well before wheel coatings, glass sealants, leather coatings, and PPF coatings. Anywhere a coating is intended to chemically react with the surface, that surface must first be grease-free.\u003c\/p\u003e\n\n\u003cp\u003eAs a complete preparation package, you combine the Degrease Tabs in the washing phase as a basic degreasing with Q²M Prep as the final IPA-wiping directly before coating — two stages that do not replace each other but complement each other. The Degrease Tabs dissolve coarse grease films on a water basis, Q²M Prep removes the last micro-residues on an alcohol basis. Together, they guarantee a surface that a coating will have no complaints about.\u003c\/p\u003e\n\n\u003cp\u003eFor beginners applying their first ceramic coating: buy Q²M Prep in the 500 ml spray bottle and add a pack of short-pile microfiber towels. Work panel by panel, don't skimp on towels, and check under LED light after each panel.\u003c\/p\u003e\n\n\u003cp\u003eThe 500 ml bottle is sufficient for the first two to three vehicles — after that, you'll know whether you'll end up with the 4-liter canister or if the 1-liter bottle is your size. If you only coat once a year, the small bottle is perfectly adequate. Professionals and detailers who apply coatings weekly should go straight for the canister — with 25 vehicles per canister and a liter price of €20, this is the most economical option for everyday detailing.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-prep-lineup-szene.jpg?v=1776015431\" alt=\"GYEON Q²M Prep Lineup — all three container sizes 500ml, 1L and 4L side by side\" loading=\"lazy\" width=\"1024\" height=\"1024\" style=\"max-width:100%;height:auto;border-radius:2px\"\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57034821960015,"sku":"D1-GYEON-Q2MPREP1000","price":25.0,"currency_code":"EUR","in_stock":true},{"title":"500ml","offer_id":57034821992783,"sku":"D1-GYEON-Q2MPREP500","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"4 liters","offer_id":57034822025551,"sku":"D1-GYEON-Q2MPREP4000","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-prep-entfetter-alkoholbasis.png?v=1771148922"},{"product_id":"gyeon-q2m-total-remover-wachs-coating-entferner","title":"Q²M TotalRemover Wax and Coating Remover","description":"\u003ch2\u003eClean Start: GYEON Q²M TotalRemover Reliably Removes Waxes and Coatings\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eWhen do I need a TotalRemover and why is IPA wipe-down not enough?\u003c\/strong\u003e\u003cbr\u003e\nIsopropanol (IPA) degreases a surface and removes oily residues – that's enough for the final check before a coating. What IPA doesn't do is completely remove cured carnauba wax, synthetic sealants, or older coating layers. For that, you need a product like GYEON Q²M TotalRemover – formulated to chemically dissolve waxes and sealants and completely remove them. Only then is the surface truly ready for a new sealant application.\n\u003c\/blockquote\u003e\n\n\u003cp\u003eEvery time a new coating or wax is applied, the question arises: how clean is the surface really? Wax residues, old sealant layers, and residual coating films significantly affect the adhesion and curing behavior of new sealants. GYEON Q²M TotalRemover is the consistent answer: a special product that reliably dissolves and removes waxes, sealants, and existing coating residues – for a truly clean starting point before re-sealing.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete removal of existing sealants:\u003c\/strong\u003e TotalRemover dissolves cured carnauba wax, synthetic sealants, and older coating layers – for a chemically clean surface that makes no compromises on adhesion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation for new coatings and sealants:\u003c\/strong\u003e Only after complete removal of old sealants can a new coating adhere and cure optimally – TotalRemover creates precisely this prerequisite.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy application, thorough effect:\u003c\/strong\u003e Apply with an applicator or microfiber cloth, let it soak in, wipe off – no aggressive scrubbing, no aggressive pH values that could damage the paintwork or new coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eDaniel's practical tip:\u003c\/strong\u003e Always use TotalRemover on cool, shaded paintwork, working panel by panel – do not treat the entire surface at once. After wiping, perform a final check of the surface with a clean microfiber cloth and a few drops of isopropanol: the cloth must remain clean, showing no oil or wax residues. Only then is the surface truly ready for the new coating.\n\u003c\/blockquote\u003e\n\n\u003ch3\u003eWhy surface preparation is everything\u003c\/h3\u003e\n\u003cp\u003eA coating can only be as good as its substrate. On a substrate with wax residues, a new SiO₂ coating will not form a complete bond – areas with good and poor adhesion will develop, which will later manifest as uneven hydrophobicity and premature coating failure. Waxes and sealants contain oil components and release agents that are designed to prevent dirt and moisture from adhering – but they also prevent a new coating from binding properly.\u003c\/p\u003e\n\u003cp\u003eGYEON Q²M TotalRemover is formulated to dissolve these oil and wax components and lift them from the paint surface, without leaving residues itself or chemically stressing the paint. The result is a surface that is chemically neutral and offers a new coating maximum bonding conditions.\u003c\/p\u003e\n\n\u003ch3\u003eApplication for optimal results\u003c\/h3\u003e\n\u003cp\u003eApply Q²M TotalRemover to a clean microfiber applicator or microfiber cloth and spread it on the cleaned paint surface. Work panel by panel, observe an exposure time of 30 to 60 seconds, then wipe off with a clean microfiber cloth. Do not wipe in circular motions – straight movements reduce the risk of spreading residues instead of picking them up.\u003c\/p\u003e\n\u003cp\u003eAfter the TotalRemover treatment, wipe the surface with a fresh microfiber cloth and an isopropanol-water mixture (approx. 50:50) – this final IPA wipe confirms complete removal and prepares the surface for the coating. The cloth should remain completely clean. If residues are still visible, repeat the TotalRemover step.\u003c\/p\u003e\n\n\u003ch3\u003eTotalRemover before a new coating application\u003c\/h3\u003e\n\u003cp\u003eThe typical use case: A vehicle comes in for its annual check, the old coating is worn and needs to be renewed. After washing and decontamination, TotalRemover is used to completely remove the remnants of the old coating. Then polish, if necessary, then fresh coating. This workflow ensures that the new coating is applied to a truly clean, chemically neutral surface.\u003c\/p\u003e\n\u003cp\u003eFor vehicles that are to be sealed with a new GYEON coating such as Q² Coat or a similar ceramic coating, TotalRemover is an indispensable step in the preparation workflow. \u003ca href=\"\/en\/products\/gyeon-q2m-wetcoat-nassversiegelung\"\u003eGYEON Q²M WetCoat\u003c\/a\u003e, on the other hand, can be applied as a wet sealant after washing even without a TotalRemover step – here, surface preparation is less critical than with cured ceramic coatings.\u003c\/p\u003e\n\n\u003ch3\u003eDifference to IPA wipe-down\u003c\/h3\u003e\n\u003cp\u003eIPA (Isopropanol) degreases and removes loose, oily residues. What IPA cannot do: completely dissolve cured waxes and sealant polymers. These compounds are chemically stable against isopropanol. Only a specifically formulated remover like TotalRemover, designed for the solubility of wax ester bonds and polymer sealants, can truly remove these layers completely.\u003c\/p\u003e\n\u003cp\u003eIPA remains important as a final control step after TotalRemover – the combination of both is the gold standard for coating preparation. TotalRemover removes the main layer, IPA confirms cleanliness and neutralizes any residual traces of the remover itself.\u003c\/p\u003e\n\n\u003ch3\u003eAnchored in the detailing workflow\u003c\/h3\u003e\n\u003cp\u003eTotalRemover belongs to the category of preparation products – it is not a care product in the true sense, but a tool for professional demands in surface preparation. In professional detailing operations, it is always used when a new sealant with the highest demands on durability and bonding is planned.\u003c\/p\u003e\n\u003cp\u003eFor vehicles that are regularly maintained with wax or sealant and are now to be switched to a long-term ceramic coating, TotalRemover is the crucial first step. Combined with \u003ca href=\"\/en\/products\/gyeon-q2m-tar-redefined-harzentferner-teerentferner\"\u003eGYEON Q²M Tar\u003c\/a\u003e for organic contaminants and a thorough decontamination wash, it creates the best possible starting point for lasting paint care.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57034838737231,"sku":"D1-GYEON-Q2MTOTAL1000","price":29.0,"currency_code":"EUR","in_stock":true},{"title":"500ml","offer_id":57034838769999,"sku":"D1-GYEON-Q2MTOTAL500","price":18.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-total-remover-wachs-coating-entferner.png?v=1771149547"}],"url":"https:\/\/detailing1.pl\/en\/collections\/gyeon-q2m-maintenance-entfettung.oembed","provider":"Detailing1","version":"1.0","type":"link"}