{"product_id":"flex-wls70190-mobiles-leuchten-stativ","title":"\"WLS-70-190\" Mobile Lamp Tripod","description":"\u003ch2\u003eFLEX WLS-70-190 Mobile Light Stand — Height-Adjustable 0.70–1.90m for Hands-Free Inspection with the DWL 2500\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat is the FLEX WLS-70-190? The WLS-70-190 is a mobile rolling stand made of powder-coated steel with a height-adjustable working range of 0.70 to 1.90m — designed as a fixed mounting bracket for the FLEX DWL 2500 full-spectrum light and other FLEX work lights for professional detailing and workshop use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003eAnyone who seriously wants to use the \u003ca href=\"\/en\/products\/flex-dwl250012-18-vollspektrum-leuchte\"\u003eFLEX DWL 2500 full-spectrum light\u003c\/a\u003e will eventually need both hands free. Light in one hand, polisher in the other — that doesn't work. The \u003cstrong\u003eFLEX WLS-70-190 Light Stand\u003c\/strong\u003e is the answer: a stable, wheeled stand that positions the DWL 2500 at exactly the right height and fixes it there, while the detailer works unhindered. The \u003cstrong\u003eFLEX WLS-70-190\u003c\/strong\u003e is thus more than an accessory — it is the prerequisite for the DWL 2500 to unfold its full potential as an inspection light.\u003c\/p\u003e\n\u003cp\u003eThe WLS-70-190 is not a generic camera tripod with an adapter plate — it is a dedicated mounting bracket from the FLEX accessory system, tailored to the requirements of professional workshop lighting. Powder-coated steel, five castors for quick repositioning on the vehicle, two of them with locking function for a secure stand during inspection — everything about this stand is designed for everyday workshop use, not for occasional leisure use.\u003c\/p\u003e\n\u003cp\u003eThe working range of 0.70 to 1.90m covers all relevant working heights: from sill polishing at ground level to roof inspection of an SUV. The \u003cstrong\u003eFLEX WLS-70-190 Light Stand\u003c\/strong\u003e can be adjusted in height without tools and moved from one side of the vehicle to the other in seconds. For detailers who work on several vehicles daily, this is a significant time saving compared to constantly holding and repositioning the light by hand.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.70–1.90m Height Adjustment — full coverage from sill to car roof.\u003c\/strong\u003e The working stroke of the WLS-70-190 covers the entire body height of a car: 0.70m for sills, wheel arches and lower parts, 1.90m for the hood and roof of an SUV. The height adjustment is stepless via a clamp lock and can be operated with one hand. Once set to the desired working height, the stand remains stable in position — no readjustment, no correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive castors, two with locking function — mobile and secure at the same time.\u003c\/strong\u003e The five castors make the WLS-70-190 a true workshop solution: roll the light along the vehicle without lifting or dragging the stand. The two lockable castors secure the stand in the inspection position — no unwanted rolling away, no wobbling during the grazing light check. This saves time and keeps the light stable in the selected inspection position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder-coated steel for durable workshop use.\u003c\/strong\u003e The stand frame made of powder-coated steel is robust enough for daily professional operation. A dead weight of 6.15 kg gives the WLS-70-190 the necessary stability even on smooth workshop floors when the light is positioned at full height. The weight is very low for a stand of this size and load capacity and makes transport in the transporter or tool trolley easy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\n\u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e For efficient paint inspection after polishing, we recommend setting the WLS-70-190 to the height of the vehicle's center and rolling it along the vehicle from front to back — instead of holding the light by hand. In the grazing light check (DWL 2500 at 6,500K), you simply roll along the flank at a distance of 30–45cm. Both hands free, constant distance, consistent angle: you see more, faster and more reliably than with the light in your hand.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eConstruction and Materials of the WLS-70-190 — Steel, Castors and Stability for Everyday Workshop Use\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX WLS-70-190 Light Stand\u003c\/strong\u003e is made of powder-coated steel — a material that has proven itself in toolmaking for decades and combines impact resistance, corrosion protection and durability. The powder coating protects against rust from polishing dust, water sprayers and cleaning agent splashes, which are unavoidable in detailing. Not painted steel that immediately rusts when scratched — the powder coating is significantly more robust and designed for continuous industrial use.\u003c\/p\u003e\n\u003cp\u003eThe dead weight of 6.15 kg is remarkably low for a stand of this height and construction class. At the same time, it ensures sufficient stability on smooth ground when the light is positioned at a full height of 1.90m — the center of gravity remains low enough due to the wide castor base to prevent tipping, even when the DWL 2500 is mounted with an 18V battery inserted. Compared to other workshop stands of this height, the WLS-70-190 is therefore a light and easy-to-handle tool.\u003c\/p\u003e\n\u003cp\u003eThe five castors are designed for workshop use: large enough for smooth screed floors and epoxy surfaces, compact enough to maneuver the stand even in confined workshop situations. The two lockable castors are located at the front base and can be fixed with a foot pedal — no bending, no tools necessary. In practice, this means: roll in, lock, check, release, continue. A cycle that repeats itself dozens of times in every inspection round, thus running completely automatically.\u003c\/p\u003e\n\u003cp\u003eThe clamp lock for height adjustment is designed for one-handed operation. In the typical detailing workflow, where the height is changed multiple times per vehicle — deep sills, door center, roof edge — this is a real comfort gain compared to stands that require a two-handed clamping screw. Anyone who has worked with such a stand and then switches to the WLS-70-190 will immediately notice the difference: everything goes faster, with less effort, without interrupting the work rhythm.\u003c\/p\u003e\n\u003ch3\u003eWorking Heights and Workflow — the WLS-70-190 in Everyday Detailing\u003c\/h3\u003e\n\u003cp\u003eThe working stroke of 0.70 to 1.90m was not chosen by chance. It corresponds to the real requirements of vehicle preparation: the lower limit of 0.70m allows the illumination of sills, entry areas and low side parts at ground level — areas that are often neglected in paint inspection, but regularly show the most contact marks. The upper limit of 1.90m is sufficient for the hood and roof of most SUV classes up to the upper edge of a city van.\u003c\/p\u003e\n\u003cp\u003eIn the practical workflow, this looks like this: set the stand to shoulder height (approx. 1.40m) for the side panels, then raise it to 1.70m for the hood and lower it to 0.80m for the sills. Each adjustment takes less than 5 seconds with the one-hand clamping. A complete inspection tour of the vehicle is completed in 10–15 minutes — with the light in hand, the same check would take significantly longer and would be less reproducible. The time saving in daily operation quickly adds up: for three vehicles daily, 30–40 minutes can be saved, which would otherwise be spent on manual holding and repositioning.\u003c\/p\u003e\n\u003cp\u003eA special advantage of the WLS-70-190 is the ability to leave the light in a fixed position while inspecting the vehicle around the stand — instead of guiding the stand around the vehicle. For large-area inspection tasks, such as roof inspection or a complete hood check, the stand is optimally positioned once and you turn yourself, not the stand. This provides a more consistent assessment perspective.\u003c\/p\u003e\n\u003cp\u003eFor mobile detailers who work on-site at customers' premises, the WLS-70-190 can be easily stowed in the transporter. The construction is compact enough for a standard tool trolley or the loading area of a small transporter. The stand is not designed for collapsible portability like a travel tripod, but for daily transport between jobs — and robust enough to withstand this daily use for years.\u003c\/p\u003e\n\u003ch3\u003eWLS-70-190 and DWL 2500 — the Recommended Combination Setup\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX WLS-70-190 Light Stand\u003c\/strong\u003e is mechanically matched to the \u003ca href=\"\/en\/products\/flex-dwl250012-18-vollspektrum-leuchte\"\u003eDWL 2500 12\/18 Full-Spectrum Light\u003c\/a\u003e. The stand's mounting bracket directly and securely accommodates the DWL 2500 — no adapter, no improvised connection. The stand was developed together with the light and is the only FLEX-recommended support system for the DWL 2500 in stationary operation.\u003c\/p\u003e\n\u003cp\u003eIn the combination setup, the DWL 2500 provides the light quality (CRI RA 96, 2,500–6,500K, 3,000 lumens), the WLS-70-190 the positioning. Both parts solve a problem that neither can solve alone: the DWL 2500 without a stand is a precise hand tool that occupies one hand; the DWL 2500 on the WLS-70-190 is a fully automatically positioned inspection light that leaves both hands of the detailer free.\u003c\/p\u003e\n\u003cp\u003eFor workshops employing several detailers, it is recommended to purchase two WLS-70-190 stands — one for the left side of the vehicle, one for the right. With two DWL 2500s and two stands, a vehicle can be completely illuminated in a single pass inspection, without swinging and without loss of time.\u003c\/p\u003e\n\u003ch3\u003eWLS-70-190 in Comparison — Rolling Stand vs. Floor Stand and Wall Mount\u003c\/h3\u003e\n\u003cp\u003eIn everyday workshop life, there are various approaches to positioning work lights: wall-mounted swivel arms, simple floor stands without castors, and mobile rolling stands like the WLS-70-190. Which solution is right depends on the working environment.\u003c\/p\u003e\n\u003cp\u003eWall-mounted swivel arms are the most convenient solution for fixed inspection stations — but they require a fixed parking space, a wall at the right distance and an installation. For mobile detailers who work at the customer's premises, this option is not available. For workshops with changing vehicle sizes and flexible parking spaces, the fixed wall mount is often not as practical as it seems.\u003c\/p\u003e\n\u003cp\u003eSimple floor stands without castors are inexpensive, but impractical in everyday use: every repositioning requires lifting and carrying, which becomes cumbersome with a stand of this load class. The \u003cstrong\u003eFLEX WLS-70-190\u003c\/strong\u003e with its five castors solves this problem completely — the stand is simply rolled, not carried.\u003c\/p\u003e\n\u003cp\u003eThe rolling stand is therefore the superior solution for anyone who needs flexibility in use and no fixed infrastructure. For professional detailers who use the DWL 2500 intensively, the WLS-70-190 is the natural complement — not a compromise, but the support system developed for it.\u003c\/p\u003e\n\u003ch3\u003eBuying the FLEX WLS-70-190 — Who Benefits from the Light Stand?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX WLS-70-190 Mobile Light Stand\u003c\/strong\u003e is the right choice for anyone who uses the \u003ca href=\"\/en\/products\/flex-dwl250012-18-vollspektrum-leuchte\"\u003eDWL 2500 Full-Spectrum Light\u003c\/a\u003e professionally and wants both hands free. It is not a mandatory component for every beginner — anyone who occasionally uses the DWL 2500 by hand can manage without a stand. However, anyone who uses it daily for paint inspection, quality assurance and acceptance inspections will quickly consider the WLS-70-190 indispensable.\u003c\/p\u003e\n\u003cp\u003eEspecially for professional detailers and body shops that work on several vehicles daily, the stand pays for itself through pure time savings. No holding, no manual repositioning, no tired shoulder after the third vehicle — the stand takes over the positioning work, the detailer the judgment work. The result is a more reproducible, faster and less tiring quality control.\u003c\/p\u003e\n\u003cp\u003eThose planning a purchase are advised to plan for the bundle of \u003ca href=\"\/en\/products\/flex-dwl250012-18-vollspektrum-leuchte\"\u003eDWL 2500\u003c\/a\u003e and WLS-70-190 together. The light alone is already a high-quality tool; together with the stand, it becomes a complete, stand-supported inspection solution that meets all requirements of professional paint inspection — from the first hologram check after polishing to the final acceptance inspection before vehicle handover.\u003c\/p\u003e","brand":"FLEX","offers":[{"title":"WLS-70-190 \"511064\"","offer_id":57377625145679,"sku":"D1-FLEX-511064","price":765.91,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/flex-wls-70-190-mobiles-leuchten-stativ-wls-70-190-511064-511064.png?v=1775059325","url":"https:\/\/detailing1.pl\/en\/products\/flex-wls70190-mobiles-leuchten-stativ","provider":"Detailing1","version":"1.0","type":"link"}