{"product_id":"ik-sprayers-spruehflasche-ik-hc-tr-1","title":"\"iK HC\" TR 1 Spray Bottle for Solvents (28\/400)","description":"\u003ch2 id=\"speakable-headline\"\u003eA spray bottle for solvents that survives the tar remover\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the \"iK HC\" TR 1? A trigger spray bottle with 1 litre of usable capacity whose tank, seals and atomiser nozzle are built for hydrocarbon solvents, oils, petroleum products and alcohols. It is not built for strong acids, or for cleaners that sit in the tank alkaline for weeks.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003e\"iK HC\" TR 1\u003c\/strong\u003e is a \u003cstrong\u003espray bottle for solvents\u003c\/strong\u003e from iK Sprayers, the sprayer brand of the Spanish Goizper group. From the outside it looks like any other trigger bottle; inside it is a different build. Tank plastic, the seals in the pump head and the dip tube are matched to grease-cutting chemistry — exactly the three parts a standard bottle gives up on first.\u003c\/p\u003e\n\n\u003cp\u003eThe failure always runs the same way. First the stroke goes soft because the seal in the piston swells. Then the head loses its pressure point and the bottle starts dripping on the shelf. In the end the nozzle corrodes and the spray pattern frays into a jet. Acetone is the fastest route there, because it pulls the plasticisers out of soft plastics and rubber — and acetone is exactly what the maker rates as optimal for the HC TR 1 in the leaflet.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eFour chemical groups sit on \"optimal\" in the maker's own table.\u003c\/strong\u003e Hydrocarbon-based solvents, oils of vegetable, animal and mineral origin, petroleum products and alcohols. Brake cleaner, tar remover and isopropanol all land in those four columns. What that gets you: you decant the stuff that normally eats your bottles.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e1 litre usable with a 50 ml scale on the tank.\u003c\/strong\u003e Usable and total capacity are the same, so you give up no head space. The scale on the translucent body is moulded in 50 ml steps — enough resolution to mix a concentrate straight in the bottle instead of reaching for a measuring jug.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e28\/400 standard neck and 0.19 kg empty.\u003c\/strong\u003e 28\/400 is the usual neck size in detailing, so heads and tanks swap around inside your own kit. The wide base keeps the bottle upright even half full, and the red-and-green flip card that comes with it sits visibly on the collar so you can tell filled from empty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e The expensive mistake is not the wrong bottle, it is the shared one. Pour an alkaline wheel cleaner into the same HC you just used for tar remover and you mix two chemistries in the dip tube, and the seal sees both. We get asked about exactly this: more product runs down the bottle than lands on the panel. The fix takes a minute: after every job pump about 100 ml of clean water through until the mist has no smell left, then unscrew the head and let it dry open. And actually label the flip card — people ask us for pre-printed cards regularly, because mixing bottles up on the shelf is the number one annoyance.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFlush it with clean water after every solvent job\u003c\/h3\u003e\n\n\u003cp\u003eYou fill the HC TR 1 neat or as a dilution, screw the head on and work without priming — the trigger builds the pressure on every pull. The rest is upkeep, and upkeep decides how long it lives.\u003c\/p\u003e\n\n\u003cp\u003eThe nozzle turns steplessly from a closed jet to a fine conical mist. For panel wipe and silicone removal before painting you want the mist, because you are after an even thin film and no runs down the flank.\u003c\/p\u003e\n\n\u003cp\u003eFor tar on the sill edge or grease in the engine bay you turn towards the jet. It carries further, lands where you aim it and stays put while it dwells. There is barely a quarter turn between the two extremes, so you correct while you work without taking the head off.\u003c\/p\u003e\n\n\u003cp\u003eAfter the job the maker's instruction is literal: release the residual pressure, rinse the tank with clean water, pump the head dry with fresh water. A blocked nozzle is cleared with water only, never with wire or a needle — the orifice is the part that makes the spray pattern, and a scratch in it stays.\u003c\/p\u003e\n\n\u003cp\u003eA little grease on the moving parts twice a year buys you seal life. Storage is frost-free between 5 and 30 °C. Below that the plastic goes brittle, above it the seals age faster.\u003c\/p\u003e\n\n\u003cp\u003eOne thing we would add that is in no manual: don't just rinse the tank, pump the head empty too. Several millilitres of solvent stay behind in the dip tube and the pump chamber after you tip the bottle out — and those keep working on the seal overnight while the tank is long since clean.\u003c\/p\u003e\n\n\u003ch3\u003eHydrocarbons and acetone yes. Strong acids no.\u003c\/h3\u003e\n\n\u003cp\u003eThe iK Sprayers compatibility table has three levels: optimal, limited, not valid. The HC TR 1 sits on optimal for solvents, oils, petroleum products and alcohols — and on limited for alkalis and ketones.\u003c\/p\u003e\n\n\u003cp\u003eThat \"limited\" carries a footnote almost every retailer text drops: for acetone, itself a ketone, the maker explicitly rates the HC TR 1 as optimal in the leaflet. In practice that means acetone, brake cleaner, tar and adhesive removers, isopropanol as panel wipe, penetrating oil and chain lube residue are this bottle's core. Alkaline cleaners and ammonia solutions you can run through briefly, but you should not leave them sitting in it for days.\u003c\/p\u003e\n\n\u003cp\u003eThen the limits that stay. Neither trigger bottle in this range is meant for acids: the \"iK Multi\" TR 1 is capped at diluted acid up to five percent, and the HC is not the acid type at all. If you want to decant an acidic iron remover, you need different kit.\u003c\/p\u003e\n\n\u003cp\u003eThe second limit is the trigger itself, not the tank. It clips onto the housing with two lugs and turns up regularly in retailer reviews as the part that breaks first. That is no argument against the bottle, it only changes what you order when something gives: the head, not the whole unit.\u003c\/p\u003e\n\n\u003cp\u003eThe third is plain ergonomics. A litre is hand work — for a full engine bay or a fleet, the pull on the trigger is what slows you down after twenty minutes. That is what pump sprayers with stored pressure are for.\u003c\/p\u003e\n\n\u003cp\u003eIn the end it is an if-then call. If hydrocarbons, acetone or alcohol are going in, the HC TR 1 is right. If instead car shampoo, interior cleaner, disinfectant or an alkaline all-purpose cleaner will live in it, grab the black \u003ca href=\"\/en\/products\/ik-sprayers-spruehflasche-ik-multi-tr-1\"\u003emulti-purpose spray bottle\u003c\/a\u003e from the same range.\u003c\/p\u003e\n\n\u003ch3\u003eOne bottle per chemical group, not one for everything\u003c\/h3\u003e\n\n\u003cp\u003eA \u003cstrong\u003espray bottle for solvents\u003c\/strong\u003e pays off for anyone with more than one product open at a time: detailers, spanner-turners with a full shelf, keen DIYers running a range rather than a single tin. If you use exactly one cleaner and spray it from its own bottle, you don't need it.\u003c\/p\u003e\n\n\u003cp\u003eThe reason is residual chemistry, and it is the heart of what we recommend: one bottle per product group — one for paint, one for wheels, one for the interior. Not out of tidiness, but because there is always a bit of the previous product left in the dip tube and the pump chamber.\u003c\/p\u003e\n\n\u003cp\u003eThe HC tank extends that logic downwards. It is the bottle for the aggressive end of the shelf, while the Multi version covers the neutral-to-alkaline everyday work. Two bottles, two head colours: the HC wears a grey head with a white lever, the Multi a black one. That is how you spot them on the shelf without reading the label — and the type designation HC TR 1 is moulded straight into the grey collar.\u003c\/p\u003e\n\n\u003cp\u003eFor the first fill, the obvious pick is what the maker built it for: a solvent-based \u003ca href=\"\/en\/products\/koch-chemie-teerwaesche-a-tea-bitumen-teerentferner\"\u003etar remover\u003c\/a\u003e for sills, arches and the lower door area. After that the bottle sits on the shelf with the flip card on red until there is bitumen on the paint again. If you are filling out your shelf, the neighbours are over in \u003ca href=\"\/en\/collections\/spruehflasche\"\u003espray bottles\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe one thing no maker prints on the bottle: 28\/400 is a measurement, not a chemical promise. The head off a multi-purpose bottle screws onto the HC tank perfectly — it just won't stand up to what's inside. So when you order a replacement head, the thread isn't what decides, the chemistry that will sit in it is. That is the thinking error that costs most heads: they fit, they just don't last.\u003c\/p\u003e","brand":"iK Sprayers","offers":[{"title":"1 Liter","offer_id":58397312844111,"sku":"D1-IKS-84174","price":74.77,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-spruheflasche-ik-hc-tr-1_1-stueck.png?v=1786015810","url":"https:\/\/detailing1.pl\/en\/products\/ik-sprayers-spruehflasche-ik-hc-tr-1","provider":"Detailing1","version":"1.0","type":"link"}