{"product_id":"sonax-profiline-prepare-reiniger-kontrollspray-entfetter","title":"PROFILINE Prepare Cleaner \u0026 Control Spray (Degreaser)","description":"\u003ch2\u003eDegrease and Inspect the Paint Before Sealing — SONAX PROFILINE Prepare\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does SONAX PROFILINE Prepare do? This cleaning and inspection spray degreases paint surfaces without leaving any residue before applying sealants and ceramic coatings — and at the same time makes remaining polishing oils and silicone residues visible through its inspection effect.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eEvery professional sealant, ceramic coating, and paint protection film application begins with an indispensable step: complete surface degreasing. Oils, silicones, polishing residues, and release agents are invisible contaminants that severely impair the chemical adhesion of sealants — an undegreased surface leads to uneven bonding, shortened durability, and visible imperfections. \u003cstrong\u003eSONAX PROFILINE Prepare\u003c\/strong\u003e is the specialized degreasing and inspection spray for this critical step: fast-acting, residue-free, and simultaneously usable as an inspection spray that makes any remaining impurities visible through light refraction.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResidue-free degreasing before sealing and coating.\u003c\/strong\u003e Polishing oils, silicones, and other release agents are hydrophobic substances that adhere to the paint unless specifically removed. Prepare dissolves these contaminants and lifts them off the paint when wiped — without leaving any residues that could interfere with the subsequent sealant. A thoroughly degreased surface is a prerequisite for polymer or ceramic sealants to achieve their full adhesion and durability.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInspection effect makes contaminants visible.\u003c\/strong\u003e In addition to its cleaning action, Prepare spray has an important inspection function: When the spray is applied to the surface, areas with oil residues or polishing oil show a characteristic streaking of the spray film. Areas without contaminants, however, show an even wetting pattern. This visual cue allows the user to re-clean precisely where needed before applying the sealant — a quality assurance measure indispensable in professional detailing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAs a preparation spray and panel wipe in the detailing workflow.\u003c\/strong\u003e Prepare is suitable both as a surface degreaser before coating and as a panel wipe after paint correction (polishing) — to completely remove polishing oil residues before sealing. This means the product can be used not only in the sealing process but also as an integral step in the complete reconditioning workflow (polishing → panel wipe → coating).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Always use Prepare immediately before applying the sealant or coating — not hours beforehand, as dust and environmental contaminants can immediately resettle on the cleaned surface. Apply the spray to a clean, lint-free microfiber cloth (do not spray directly onto the paint to prevent uncontrolled spreading), wipe the area to be sealed, and immediately switch to the dry side of the cloth to wipe off. Work in a garage or enclosed spaces without drafts to avoid recontamination. Immediately after Prepare, apply \u003ca href=\"\/en\/products\/sonax-profiline-polymernetshield-lackversiegelung\"\u003eSONAX PROFILINE PolymerNetShield\u003c\/a\u003e or a ceramic coating.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eDegreaser and Inspection Spray — How Prepare Prepares Surfaces for Coatings\u003c\/h3\u003e\n\u003cp\u003eThe action of the degreaser and inspection spray is based on fast-evaporating solvents that dissolve fats, oils, and silicone residues on the paint surface and lift them off the paint with the wiping cloth. Unlike aqueous cleaners, these solvents do not leave a moisture film on the surface after evaporation — the evaporation is complete and residue-free, which provides the ideal basis for the immediate subsequent coating.\u003c\/p\u003e\n\u003cp\u003eIts particular value lies in its dual function: While the spray cleans, the visual inspection effect shows the user where contaminants are still present. This effect is based on the different surface tension of contaminated and clean paint: On degreased paint, the spray spreads evenly as a fine film; on contaminated paint, it contracts and shows characteristic craters or beads. This effect is particularly important if the surface to be coated was not completely oil-free after polishing — even small amounts of polishing oil can permanently impair the adhesion of a ceramic sealant locally.\u003c\/p\u003e\n\u003cp\u003eIn professional vehicle detailing, the panel wipe step with a degreaser like Prepare is a quality standard that no serious detailer omits: Ceramic sealants like \u003ca href=\"\/en\/products\/sonax-profiline-hybridcoating-cc-one-keramikversiegelung\"\u003eSONAX PROFILINE HybridCoating \"CC One\"\u003c\/a\u003e bond chemically to the clear coat — a layer of grease blocking this bonding area reduces adhesion quality and can lead to detachment or uneven protection after months. The few minutes required for a thorough degreasing step pay off in significantly improved durability and uniformity of the coating.\u003c\/p\u003e\n\n\u003ch3\u003eApplying Prepare Correctly — The Panel Wipe Workflow Step-by-Step\u003c\/h3\u003e\n\u003cp\u003eApplying the panel wipe spray is simple, but the quality of execution is crucial for the final coating result. Preparation: The vehicle must be completely washed and dried before the degreasing step — Prepare is not a cleaner for dirt or dust, but exclusively for oily and silicone-containing residues on an already washed, dry surface. Water and dirt residues on the surface prevent the degreasing effect and leave streaks.\u003c\/p\u003e\n\u003cp\u003eApplication: The microfiber cloth for Prepare should be new or freshly washed — a cloth that has already absorbed polishing oil will transfer it back onto the paint surface during wiping, counteracting the degreasing effect. Spray Prepare onto the cloth (not directly onto the paint) to control the amount of solvent and prevent uncontrolled action on sensitive paint areas. Wipe over the surface with light to medium pressure — the inspection effect is immediately visible: Even wetting indicates a clean surface, uneven distribution shows oil residues. Rework until even wetting is visible.\u003c\/p\u003e\n\u003cp\u003eRemoval: Immediately after wiping with the damp side of the cloth, wipe off with the dry side or a second clean cloth before the solvent fully evaporates. This removes the dissolved fats and oils from the paint and prevents them from being rubbed back onto the surface. Immediately thereafter, apply the chosen sealant product — without pause, as the degreased paint is now maximally receptive to the coating chemistry. On large vehicles, work section by section: Prepare and then immediately seal, section by section.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of Application — When Degreasing Before Sealing is Indispensable\u003c\/h3\u003e\n\u003cp\u003eThe degreaser spray is indispensable in several situations within the detailing workflow. The most common application is the panel wipe after paint correction: Every polish releases polishing oil, which acts as a lubricant and abrasive carrier between the pad and the paint. After polishing, this oil film remains on the paint — a uniform, fine, but harmful layer for the adhesion of sealants. Prepare completely removes this film and prepares the freshly polished clear coat for immediate sealing.\u003c\/p\u003e\n\u003cp\u003eThe second common area of use is preparation for paint protection films (PPF): Protective films adhere to the paint with adhesive layers and require an absolutely oil- and silicone-free surface for optimal adhesion and edge sealing. Even minor silicone spots under the film can lead to air bubbles, incomplete adhesion, and later detachment — a flawless degreasing step with Prepare is therefore a special professional standard for PPF applications. Degreasing is also important when re-sealing vehicles that have previously been treated with wax or polymer products: Old wax and polymer residues on the paint can noticeably impair the adhesion of a ceramic sealant in those areas.\u003c\/p\u003e\n\u003cp\u003ePrepare is also valuable for quality control after polishing, regardless of the subsequent sealing: The inspection effect shows whether the polishing was carried out evenly across the entire surface, or whether areas with polishing residues indicate spots that have not yet been worked on. Thus, Prepare simultaneously serves as a quality assurance tool that reveals gaps in the polishing work, thereby preventing errors in the final sealing before they are encapsulated.\u003c\/p\u003e\n\n\u003ch3\u003ePrepare Compared — Degreasers and IPA Solutions for Paint Pre-treatment\u003c\/h3\u003e\n\u003cp\u003eIn professional detailing, several products are used as degreasers and panel wipes. Isopropyl alcohol (IPA) in diluted form (typically 10–20% in water) is a classic panel wipe that is inexpensive and widely available — its degreasing effect is good, but the inspection function is absent. Those who degrease with IPA must rely on other indicators to assess the completeness of the degreasing step. Prepare offers a clear advantage here: The visual inspection effect gives the user immediate feedback on the quality of the degreasing step.\u003c\/p\u003e\n\u003cp\u003eCompared to universal degreasers or solvent-based cleaners, Prepare positions itself as a product that is more compatible with paint and less aggressive to surfaces — not every solvent can be used without problems on sensitive clear coats, fresh multi-layer paint finishes, or coated surfaces. Prepare is specially formulated for use on vehicle paint and is safe on all common clear coat qualities. On fresh factory new paint finishes or repair paints, a short test application should be made to ensure compatibility — especially on very freshly applied clear coat that has not yet fully cured.\u003c\/p\u003e\n\u003cp\u003eCompared to brand-independent degreasers, PROFILINE Prepare has the advantage of system compatibility: It is matched to the PROFILINE sealant line and leaves no residues that would be incompatible with PROFILINE coating products. For detailers who use a completely coordinated product system, this is an important quality factor — systematic compatibility reduces risks and makes results more reproducible. The \u003ca href=\"\/en\/products\/sonax-profiline-perfectfinish-finish-politur\"\u003eSONAX PROFILINE PerfectFinish \"4\/6\"\u003c\/a\u003e as a preceding finish polish and Prepare as a panel wipe afterwards together result in a perfect pre-coating workflow.\u003c\/p\u003e\n\n\u003ch3\u003eBuying SONAX PROFILINE Prepare — Container Size and Recommendation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE Prepare\u003c\/strong\u003e is available in 400 ml (single bottle) as well as in 2- and 3-piece sets. The 400 ml bottle is sufficient for many vehicle degreasing jobs with proper dosage — since the spray is applied to the cloth and not to the paint, the product quantity is easily controllable. For detailers who regularly coat vehicles and perform panel wipes as a fixed workflow step, the 3-piece set is the most economical option.\u003c\/p\u003e\n\u003cp\u003ePrepare is particularly recommended for all detailers and reconditioning businesses who apply professional ceramic sealants and do not want to compromise on surface preparation. Even for enthusiasts who coat their own vehicles with a polymer or ceramic sealant themselves, Prepare guarantees that the sealant adheres as well and as durably as possible. A common mistake when self-coating is omitting the degreasing step — those who seal directly after washing risk poor adhesion due to invisible polishing oil or wax residues on the paint.\u003c\/p\u003e\n\u003cp\u003eIn summary, Prepare is the connecting link between paint correction and coating — a step that is easily overlooked but determines the quality and longevity of the entire coating result. Those who consistently integrate this step into their detailing workflow will be rewarded with significantly better and more durable sealing results that make the difference between a professional and merely superficially good result.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"400 ml","offer_id":53519725297999,"sku":"D1-SNX-2373000","price":54.08,"currency_code":"PLN","in_stock":true},{"title":"2x 400ml Set","offer_id":53519725330767,"sku":"D1-SNX-2373000_2","price":105.96,"currency_code":"PLN","in_stock":true},{"title":"3x 400ml Set","offer_id":53519725363535,"sku":"D1-SNX-2373000_3","price":155.76,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-prepare-reiniger-kontrollspray-entfetter_400ml.png?v=1730644408","url":"https:\/\/detailing1.pl\/en\/products\/sonax-profiline-prepare-reiniger-kontrollspray-entfetter","provider":"Detailing1","version":"1.0","type":"link"}