{"product_id":"sonax-profiline-schaumpad-weich-polierpad","title":"PROFILINE Foam Pad soft Polishing Pad","description":"\u003ch2\u003eHologram-Free Finish Polishing with the SONAX PROFILINE Soft Foam Pad\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat makes the SONAX PROFILINE Soft Foam Pad special? The soft, fine-pored foam pad allows for machine finish polishing without holograms — ideal for delicate paints, beginner corrections, and final touch-ups after more aggressive polishing stages.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn the final phase of paint correction, the pad often matters more than the polish. If holograms, swirls, or machine marks are left behind after a heavy-cut treatment, the actual work step is lost — and you have to start over. This is exactly where the \u003cstrong\u003eSONAX PROFILINE Soft Foam Pad\u003c\/strong\u003e is indispensable: a fine-pored finish pad made of open-cell foam that distributes polish residues evenly, dissipates heat in a controlled manner, and causes no new damage even on sensitive clear coat surfaces. It combines minimal cutting performance with maximum smoothness — turning a technically solid paint correction into a high-quality finish result.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFine-pored foam structure for a hologram-free finish.\u003c\/strong\u003e The open-cell soft foam of the Soft Foam Pad generates less shear force than hard or medium pads. Polish is distributed evenly over a larger contact surface, largely preventing the formation of machine marks and holograms. This difference is clearly visible in oblique light, especially on dark paints — black, dark blue, anthracite.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimal heat dissipation for temperature-sensitive paints.\u003c\/strong\u003e Even at low pressure settings, orbital sanders generate localized heat. The soft foam yields under pressure, preventing heat build-up in a small area. This protects against temporary paint softening, which can otherwise lead to uneven polishing marks. This property is crucial, especially for thin-walled plastic components or repainted areas.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversally applicable — from finish polishing to sealant preparation.\u003c\/strong\u003e The Soft Foam Pad not only functions as the last correction step after a hard or medium cut but also as a direct application pad for finish polishes without prior correction. On new or only slightly worn paint, it can be used immediately — without taking the detour through more aggressive pad stages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1 Pro Tip:\u003c\/strong\u003e Before the first use, lightly moisten the Soft Foam Pad with water and squeeze out any excess moisture. A minimally moistened pad absorbs the polish more evenly and prevents dry foam from immediately soaking up the polish before it can act on the paint surface. Always start the orbital polisher on the paint — never in the air — to avoid polish splatters on the bodywork.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSoft Foam for Paint Finish — How the Fine-Pored Pad Technology Works\u003c\/h3\u003e\n\n\u003cp\u003ePolyurethane foam is not all the same. What hard and soft actually mean in a polishing pad depends on the pore size, cell structure, and Shore hardness of the foam. The \u003cstrong\u003eSoft Foam Pad\u003c\/strong\u003e uses an open-cell foam structure with small, evenly distributed pores — significantly finer than the Hard Foam Pad, which works with coarser cells and thus generates more shear force. This finer structure has direct effects on the polishing result: polish is not applied in spots but distributed evenly over the entire working surface.\u003c\/p\u003e\n\n\u003cp\u003eAnother advantage lies in its damping properties. During machine polishing, the pad acts as a buffer between the orbital disc and the paint surface. A soft foam more strongly cushions the orbits of the eccentric movement — the pad does not rest rigidly on the surface but \"follows\" slight contours, edges, and curves better than a hard counterpart. For polishing work on bumpers, door edges, or mirrors, this means even pressure without over-processing at the edges.\u003c\/p\u003e\n\n\u003cp\u003eThe connection to the backing plate is made via a hook-and-loop compatible backing, which is compatible with common SONAX PROFILINE orbital backing plates and support plates. The 75 mm diameter fits smaller orbital discs and is ideal for precision work on small areas such as A-pillars, fuel filler caps, or door openings. The 160 mm variant is the standard application area on large bodywork surfaces such as bonnets, roofs, and doors.\u003c\/p\u003e\n\n\u003cp\u003eA frequently underestimated aspect is heat behavior. Soft foam has a higher internal surface area and can distribute heat better through the pad volume than compact materials. During fast work steps with high orbital frequency, friction heat is generated at the contact surface between paint and pad. A soft pad dissipates this heat more evenly instead of concentrating it. This is why, on sensitive solid paints or when working in summer, the soft foam is often the safer choice compared to a medium pad.\u003c\/p\u003e\n\n\u003ch3\u003eCorrect Use of the Soft Foam Pad — Workflow from First Contact to Hologram-Free Finish\u003c\/h3\u003e\n\n\u003cp\u003eThe crucial step before the actual polishing work is the priming phase. Squeeze a hazelnut-sized amount of finish polish onto the Soft Foam Pad, centered on the orbital backing plate, and spread it roughly by hand over an area about the size of an A4 sheet. Then start the orbital polisher at level 1 and distribute the polish without pressure over the surface before increasing speed and pressure. This first pass \"saturates\" the pad and ensures that it no longer absorbs polish into its pores — instead, it will now release it evenly.\u003c\/p\u003e\n\n\u003cp\u003eFor finish polishes such as the \u003ca href=\"\/en\/products\/sonax-profiline-ex-04-06-hochglanz-politur\"\u003eSONAX PROFILINE EX \"04-06\" High-Gloss Polish\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/sonax-profiline-np-03-06-hochglanz-politur-finish\"\u003eNP \"03-06\" High-Gloss Polish\u003c\/a\u003e, a speed range of level 3–4 is recommended for typical dual-action orbital polishing machines. Higher speeds generate more heat and thus slightly more cutting performance, but also increase the risk of holograms on dark-tinted paints. The rule of thumb: rather slow and multiple times than fast and once.\u003c\/p\u003e\n\n\u003cp\u003eThe Soft Foam Pad is also suitable as the last step after a multi-stage paint correction. If the \u003ca href=\"\/en\/products\/sonax-profiline-schaumpad-hart-polierpad\"\u003eHard Foam Pad\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/sonax-profiline-lammwollpad-wollpad\"\u003eLambswool Pad\u003c\/a\u003e was used previously, the final pass with the soft pad and a pure finish polish ensures that all remaining sanding marks from the previous stage are removed. This \"finishing run\" is standard in professional detailing shops and often the difference between a mediocre and an impeccable result.\u003c\/p\u003e\n\n\u003cp\u003eAfter polishing, the pad should be cleaned immediately. Polish residues dry hard in the foam and permanently alter the pad structure. Cleaning with warm water and a mild special detergent preserves the pores of the soft foam permanently. Cleaning in lukewarm water with light squeezing is recommended — no wringing, as this damages the open-cell structure. The pad should be air-dried flat on a clean cloth, never in the sun or on a radiator.\u003c\/p\u003e\n\n\u003ch3\u003eHologram-Free Finish Polishing — Use Cases and Limitations of the Soft Foam Pad\u003c\/h3\u003e\n\n\u003cp\u003eThe strength of the Soft Foam Pad clearly lies in the finish area. For new paints that only show slight transport scratches or superficial wash marks, it can be used directly with a finish polish without a prior cutting stage. This saves time, protects the paint, and is sufficient for most vehicles that are regularly maintained and do not have deep paint damage.\u003c\/p\u003e\n\n\u003cp\u003eThe Soft Foam Pad works particularly impressively on metallics and pearl effect paints. Due to their embedded metallic or mica particles, these paint types are more susceptible to scattered light effects that can result from overly aggressive polishing methods. The low shear force of the soft pad ensures that the alignment of the effect particles is maintained and the look after polishing corresponds to the original condition. Anyone who has ever seen a metallic paint lose its luster with a gray haze after an overly aggressive treatment knows why this property is so important.\u003c\/p\u003e\n\n\u003cp\u003eAt the same time, there are honest limitations: deeper scratches, oxidation damage, or wet sanding marks from grit P1500 will not be completely removed with the Soft Foam Pad. Here, a cutting stage is first necessary — either with the \u003ca href=\"\/en\/products\/sonax-profiline-schaumpad-medium-polierpad\"\u003eMedium Foam Pad\u003c\/a\u003e and an abrasive polish or, in the case of severe oxidation, with the Hard Foam Pad or Lambswool Pad. The Soft Foam Pad then takes over as the last stage and removes the micro-marks from the previous treatment.\u003c\/p\u003e\n\n\u003cp\u003eAnother often underestimated application area: preparation for ceramic coatings. Before applying a coating sealant, the paint must be absolutely blemish-free — no holograms, no swirls. With the Soft Foam Pad and an IPA-compatible finish polish, a final surface can be achieved on which the ceramic layer adheres precisely and can develop its full protective effect. This preparatory finishing pass is standard in professional coating operations.\u003c\/p\u003e\n\n\u003cp\u003eSpecial caution is required for fresh repaints. Fresh paint is not yet fully cured in the first few weeks and reacts more sensitively to heat and mechanical pressure. The Soft Foam Pad is the safest choice here because it generates the least energy input — nevertheless, machine polishing should be avoided entirely for repaints less than 30 days old.\u003c\/p\u003e\n\n\u003ch3\u003eSoft Foam Pad in Comparison — When Which Pad is the Right Choice\u003c\/h3\u003e\n\n\u003cp\u003eThe SONAX PROFILINE pad system is consistently staggered by cutting performance and works together with suitable polishes. The Soft Foam Pad is at the lower end of the cutting performance curve — in combination with the Medium Foam Pad and the Hard Foam Pad, a complete correction system results that offers a suitable combination for almost every paint condition.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-profiline-schaumpad-medium-polierpad\"\u003eMedium Foam Pad\u003c\/a\u003e is the all-rounder for medium corrections: it reliably removes wash marks, light swirls, and past polishing marks, but still leaves isolated fine marks on dark paints, which are then removed with the soft pad. The combination of medium followed by soft is the most efficient solution for the majority of all professional vehicle detailing — two steps instead of three, and yet a perfect result.\u003c\/p\u003e\n\n\u003cp\u003eThe Hard Foam Pad is designed for heavy-cut applications — oxidation, deep wet sanding, heavily weathered paints. It works with higher pressure on a smaller effective contact surface and thus generates significantly more cutting performance. It is contraindicated on fresh or delicate paints. If you have worked with the Hard Foam Pad, you usually have to switch to the Soft Foam Pad via the Medium Foam Pad as an intermediate stage to achieve a completely hologram-free result.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-profiline-lammwollpad-wollpad\"\u003eLambswool Pad\u003c\/a\u003e represents a category of its own: lambswool fibers, due to their natural structure, generate very high cutting performance that differs from that of a hard foam pad. They work more aggressively, but also hotter — and typically leave more polishing marks that then need to be polished out with the Soft Foam Pad. The Lambswool Pad is ideal for extreme corrections and professionals who want to save time; the Soft Foam Pad is its ideal finishing partner.\u003c\/p\u003e\n\n\u003cp\u003eIn comparison with the \u003ca href=\"\/en\/products\/sonax-profiline-exzenterpad-weich-125-polierpad\"\u003eSoft Orbital Pad 125\u003c\/a\u003e — another soft pad in the PROFILINE system — there is a relevant difference: the Soft Orbital Pad 125 is designed for the 125 mm diameter and optimized for specific orbital machine backing plates. The Soft Foam Pad is available in 75 mm and 160 mm sizes, thus covering the two extremes of the pad spectrum: precision work on small areas and fast work on large bodywork surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eBuying the Soft Foam Pad — For Which Users and Workflows It Is Worth It\u003c\/h3\u003e\n\n\u003cp\u003eThe Soft Foam Pad is worthwhile for anyone who wants to perform machine polishing at a professional quality level — regardless of whether they work commercially or as a dedicated hobby detailer. Beginners benefit from the fact that the soft pad minimizes the risk of errors: those who work with too much pressure or too high a speed will cause damage significantly less often with the Soft Foam Pad than with a more aggressive pad. This also makes it the first pad for anyone just starting to learn machine polishing.\u003c\/p\u003e\n\n\u003cp\u003eProfessional detailers appreciate the Soft Foam Pad as the last step in any multi-stage workflow. Whether after a CutMax pass with the Hard Foam Pad, after a \u003ca href=\"\/en\/products\/sonax-profiline-perfectfinish-finish-politur\"\u003ePerfectFinish Polish\u003c\/a\u003e on a medium stage, or as a final quality assurance before sealing — the soft pad is the one that defines the final result. No other pad in the SONAX PROFILINE system creates such a uniformly smooth, hologram-free surface in a single step.\u003c\/p\u003e\n\n\u003cp\u003eThe size selection should be based on the existing polishing machine. The 75 mm variant is ideal for spot corrections and tight areas — it fits smaller orbital backing plates and allows precise work in places where a 160 mm pad cannot be controlled. The 160 mm variant is the surface worker: bonnet, roof, sides — here it demonstrates its productivity strength. In a well-equipped workshop, both sizes are available and are used specifically depending on the task.\u003c\/p\u003e\n\n\u003cp\u003eAs a direct complement, the high-quality finish polishes from the SONAX PROFILINE range are recommended. The EX \"04-06\" High-Gloss Polish is the classic combination recommendation: low to no cutting performance, maximum high gloss, and hologram obsession. For paint surfaces that still show slight fine marks after a hard-cut treatment, the NP \"03-06\" High-Gloss Polish is the more precise choice — it offers a bit more cutting performance and more reliably works out the remaining marks from the pretreatment. Both polishes are designed for the Soft Foam Pad and deliver the best results when used together.\u003c\/p\u003e\n\n\u003cp\u003eIf you take care of your Soft Foam Pad, it will last a long time. A carefully cleaned and air-dried pad retains its pore structure over many uses — and thus also its characteristic ability to release polish evenly and dissipate heat in a controlled manner. Professionals clean their pads immediately after each vehicle, store them flat in a closed container, and separate used from new pads to avoid cross-contamination with polish residues. These simple measures double the effective lifespan and ensure consistent polishing results over the entire period.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"Ø75 mm","offer_id":57345170178383,"sku":"D1-SNX-4926000","price":111.16,"currency_code":"PLN","in_stock":true},{"title":"Ø160 mm","offer_id":57345170211151,"sku":"D1-SNX-4932410","price":44.89,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-schaumpad-weich_160-mm.png?v=1774736676","url":"https:\/\/detailing1.pl\/en\/products\/sonax-profiline-schaumpad-weich-polierpad","provider":"Detailing1","version":"1.0","type":"link"}